Skip to code content (skip section selection)
Compare to:
New York City Overview
The New York City Charter
NEW YORK CITY CHARTER
The New York City Administrative Code
NEW YORK CITY ADMINISTRATIVE CODE
Title 1: General Provisions
Title 2: City of New York
Title 3: Elected officials
Title 4: Property of the City
Title 5: Budget; Capital Projects
Title 6: Contracts, Purchases and Franchises
Title 7: Legal Affairs
Title 8: Civil Rights
Title 9: Criminal Justice
Title 10: Public Safety
Title 11: Taxation and Finance
Title 12: Personnel and Labor
Title 13: Retirement and Pensions
Title 14: Police
Title 15: Fire Prevention and Control
Title 16: Sanitation
Title 16-A: [Commercial Waste Removal]
Title 16-B: Commercial Waste Zones
Title 17: Health
Title 18: Parks
Title 19: Transportation
Title 20: Consumer and Worker Protection
Title 20-A: [Shipboard Gambling]
Title 21: Social Services
Title 21-A: Education
Title 22: Economic Affairs
Title 23: Communications
Title 24: Environmental Protection and Utilities
Title 25: Land Use
Title 26: Housing and Buildings
Title 27: Construction and Maintenance
Title 28: New York City Construction Codes
Loading...
Title 29: New York City Fire Code
Title 30: Emergency Management
Title 31: Department of Veterans' Services
Title 32: Labor and Employment
Title 33: Investigations
Title 34: Racial Equity
Appendix A: Unconsolidated Local Laws
The Rules of the City of New York
THE RULES OF THE CITY OF NEW YORK
Title 1: Department of Buildings
Title 2: Board of Standards and Appeals
Title 3: Fire Department
Title 6: Department of Consumer and Worker Protection
Title 9: Procurement Policy Board Rules
Title 12: Franchise and Concession Review Committee
Title 15: Department of Environmental Protection
Title 16: Department of Sanitation
Title 17: Business Integrity Commission
Title 19: Department of Finance
Title 20: Tax Appeals Tribunal
Title 21: Tax Commission
Title 22: Banking Commission
Title 24: Department of Health and Mental Hygiene
Title 25: Department of Mental Health and Retardation [Repealed]
Title 28: Housing Preservation and Development
Title 29: Loft Board
Title 30: Rent Guidelines Board
Title 31: Mayor's Office of Homelessness and Single Room Occupancy
Title 34: Department of Transportation
Title 35: Taxi and Limousine Commission
Title 38: Police Department
Title 38-A: Civilian Complaint Review Board
Title 39: Department of Correction
Title 40: Board of Correction
Title 41: Department of Juvenile Justice
Title 42: Department of Probation
Title 43: Mayor
Title 44: Comptroller
Title 45: Borough Presidents
Title 46: Law Department
Title 47: Commission on Human Rights
Title 48: Office of Administrative Trials and Hearings (OATH)
Title 49: Department of Records and Information Services
Title 50: Community Assistance Unit
Title 51: City Clerk
Title 52: Campaign Finance Board*
Title 53: Conflicts of Interest Board
Title 55: Department of Citywide Administrative Services
Title 56: Department of Parks and Recreation
Title 57: Art Commission
Title 58: Department of Cultural Affairs
Title 60: Civil Service Commission
Title 61: Office of Collective Bargaining
Title 62: City Planning
Title 63: Landmarks Preservation Commission
Title 66: Department of Small Business Services
Title 67: Department of Information Technology and Telecommunications
Title 68: Human Resources Administration
Title 69: Department of Aging
Title 70: In Rem Foreclosure Release Board
Title 71: Voter Assistance Commission
Title 72: Office of Emergency Management
Title 73: Civic Engagement Commission
Title 74: Community Hiring
1501.3 Applicability.
The application of the referenced standards shall be as specified in Section 102.8.
Section PC 1502: Standards
 
 
AHRI
Air-Conditioning, Heating, & Refrigeration Institute
4100 North Fairfax Drive, Suite 200
Arlington, VA 22203
Standard reference number
Title
Referenced in code section number
1010—02
Self-contained, Mechanically Refrigerated Drinking-Water Coolers
410.1
810—16
Addendum 1
Performance Rating of Automatic Commercial Ice-makers
428.1.1
 
 
ANSI
American National Standards Institute
25 West 43rd Street, Fourth Floor
New York, NY 10036
Standard reference number
Title
Referenced in code section number
A118.10—99
Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation
417.5.2.5, 417.5.2.6
Z4.3—95
Minimum Requirements for Nonsewered Waste-disposal Systems
311.1
Z21.22—99 (R2003)
Relief Valves for Hot Water Supply Systems with Addenda Z21.22a—2000 (R2003) and Z21.22b—2001 (R2003)
504.2, 504.4, 504.4.1
CSA B45.5—11 / IAPMO Z124—11
Plastic Plumbing Fixtures
407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
 
 
API
American Petroleum Institute
1220 L Street NW
Washington, DC 20005-4070
Standard reference number
Title
Referenced in code section number
12D – 2008
Specification for Field Welded Tanks for Storage of Production Liquids, effective April 1, 2009
1302.7.2, 1303.10.2
12F – 2008
Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009
1302.7.2, 1303.10.2
 
 
ASCE/SEI
American Society of Civil Engineers
Structural Engineering Institute
1801 Alexander Bell Drive
Reston, VA 20191-4400
Standard reference number
Title
Referenced in code section number
24—14
Flood Resistant Design and Construction
715.1, 1101.9.1
 
ASME
American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016-5990
Standard reference number
Title
Referenced in code section number
ASME
American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016-5990
Standard reference number
Title
Referenced in code section number
A112.1.2—2004
Air Gaps in Plumbing Systems
406.1, 409.2, Table 608.1, 608.13.1
A112.1.3—2000 (R2011)
Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances
406.1, 409.2, Table 608.1, 608.13.1
A112.3.1—2007
Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground
412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7
A112.3.4—2013 / CSA B45.9—2013
Macerating Toilet Systems and Related Components
712.4.1
A112.4.1—2009
Water Heater Relief Valve Drain Tubes
504.6
A112.4.2—2009
Water Closet Personal Hygiene Devices
424.9
A112.4.3—1999 (R2010)
Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
405.4
A112.4.14—2004 (R2010)
Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
Table 605.7
A112.6.1M—1997 (R2008)
Floor-affixed Supports for Off-the-floor Plumbing Fixtures for Public Use
405.4.3
A112.6.2—2000 (R2010)
Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks
405.4.3
A112.6.3—2001 (R2007)
Floor and Trench Drains
412.1
A112.6.4—2003 (R2008)
Roof, Deck, and Balcony Drains
1102.6
A112.6.7—2010
Enameled and Epoxy-coated Cast-iron and PVC Plastic Sanitary Floor Sinks
427.1
A112.6.9—2005 (R2010)
Siphonic Roof Drains
1107.1
A112.14.1—2003
Backwater Valves
715.2
A112.14.3—2000
Grease Interceptors
1003.3.4
A112.14.4—2001 (Reaffirmed 2007)
Grease Removal Devices
1003.3.4
A112.18.1—2012 / CSA B125.1—2012
Plumbing Supply Fittings
424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
A112.18.2—2011 / CSA B125.2—2011
Plumbing Waste Fittings
424.1.2
A112.18.3—2002 (Reaffirmed 2008)
Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
424.2, 424.6
A112.18.6 / CSA B125.6—2009
Flexible Water Connectors
605.6
A112.18.9—2011
Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures
404.3
A112.19.1—2013 / CSA B45.2—2013
Enameled Cast Iron and Enameled Steel Plumbing Fixtures
407.1, 410.1, 415.1, 416.1, 418.1
A112.19.2—2013 / CSA B45.1—2013
Ceramic Plumbing Fixtures
401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
A112.19.3— 2008 / CSA B45.4—2008 (R2013)
Stainless Steel Plumbing Fixtures
405.9, 407.1, 415.1, 416.1, 418.1, 420.1
A112.19.5—2011 / CSA B45.15—2011
Flush Valves and Spuds for Water-closets, Urinals, and Tanks
425.4
A112.19.7M—2012 / CSA B45.10—2012
Hydromassage Bathtub Systems
421.1, 421.4
A112.19.12—2006
Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems
416.4, 418.3
A112.19.14—2006 (R2011)
Six-Liter Water Closets Equipped with a Dual Flushing Device
420.1
A112.19.15—2005
Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors
407.4, 421.6
A112.19.19—2006
Vitreous China Nonwater Urinals
419.1
A112.21.3—1985 (R2007)
Hydrants for Utility and Maintenance Use
Table 608.1, 608.13.6
A112.36.2M—1991 (R2008)
Cleanouts
709.1.10.2
ASSE 1016 /
ASME A112.1016 /
CSA B125.16—2011
Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings
424.3, 424.4, 607.4
B1.20.1—1983 (R2006)
Pipe Threads, General Purpose (inch)
605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3
B16.3—2011
Malleable Iron Threaded Fittings Classes 150 and 300
Table 702.4, Table 1102.7
B16.4—2011
Gray Iron Threaded Fittings Classes 125 and 250
Table 605.5, Table 702.4, Table 1102.7
B16.12—2009
Cast-iron Threaded Drainage Fittings
Table 702.4, Table 1102.7
B16.15—2011
Cast Bronze Threaded Fittings
Table 605.5, Table 702.4
B16.18—2012
Cast Copper Alloy Solder Joint Pressure Fittings
Table 605.5, Table 702.4
B16.22—2001 (R2010)
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
Table 605.5, Table 702.4
B16.23—2011
Cast Copper Alloy Solder Joint Drainage Fittings (DWV)
Table 702.4
B16.26—2011
Cast Copper Alloy Fittings for Flared Copper Tubes
Table 605.5, Table 702.4
B16.29—2012
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV)
Table 702.4
B31.9—2017
Building Services Piping
605.23.2
BPVC—2010
Boiler and Pressure Vessel Code
312.11.1, 501.2
 
 
ASPE
American Society of Plumbing Engineers
8614 Catalpa Avenue, Suite 1007
Chicago, IL 60656-1116
Standard reference number
Title
Referenced in code section number
45—2013
Siphonic Roof Drainage Systems
1107.1
 
ASSE
American Society of Sanitary Engineering
901 Canterbury Road, Suite A
Westlake, OH 44145
Standard reference number
Title
Referenced in code section number
ASSE
American Society of Sanitary Engineering
901 Canterbury Road, Suite A
Westlake, OH 44145
Standard reference number
Title
Referenced in code section number
1001—08
Performance Requirements for Atmospheric Type Vacuum Breakers
425.2, Table 608.1, 608.13.6, 608.16.4.1
1002—08
Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks
425.3.1, Table 608.1
1003—09
Performance Requirements for Water Pressure Reducing Valves
604.8
1004—08
Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines
409.1
1008—06
Performance Requirements for Plumbing Aspects of Food Waste Disposer Units
413.1
1010—04
Performance Requirements for Water Hammer Arresters
604.9
1011—04
Performance Requirements for Hose Connection Vacuum Breakers
Table 608.1, 608.13.6
1012—09
Performance Requirements for Backflow Preventers with Intermediate Atmospheric Vent
Table 608.1, 608.13.3, 608.16.2
1013—09
Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers
Table 608.1, 608.13.2, 608.16.2
1015—09
Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.13.7
ASSE 1016 /
ASME A112.1016 /
CSA B125.16—2011
Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings
424.3, 424.4, 607.4, 613.1
1017—2010
Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems
501.2.3, 613.1
1018—2010
Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied
1002.4.1.1, 1002.4.1.2
1019—2010
Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type
Table 608.1, 608.13.6,
1020—04
Performance Requirements for Pressure Vacuum Breaker Assembly
Table 608.1, 608.13.5
1022—03
Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment
Table 608.1, 608.16.1, 608.16.10
1024—04
Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets)
Table 608.1, 608.13.10
1035—08
Performance Requirements for Laboratory Faucet Backflow Preventers
Table 608.1, 608.13.6
1037—90
Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures
425.2
1047—2009
Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.13.2
1048—2009
Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies
Table 608.1, 608.13.7
1052—04
Performance Requirements for Hose Connection Backflow Preventers
Table 608.1, 608.13.6
1055—2009
Performance Requirements for Chemical Dispensing Systems
608.13.9
1056—2010
Performance Requirements for Spill Resistant Vacuum Breaker
Table 608.1, 608.13.5, 608.13.8
1060—2006
Performance Requirements for Outdoor Enclosures for Fluid Conveying Components
608.14.1
1061—2010
Performance Requirements for Removable and Nonremovable Push Fit Fittings
Table 605.5, 605.14.4
1062—2006
Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings
424.7
1066—2009
Performance Requirements for Individual Pressure Balancing In-line Valves for Individual Fixture Fittings
604.11
1069—05
Performance Requirements for Automatic Temperature Control Mixing Valves
424.4
1070—04
Performance Requirements for Water-temperature Limiting Devices
408.3, 416.5, 423.3, 424.5, 607.1.2
1079—2005
Performance Requirements for Dielectric Pipe Unions
605.24.1, 605.24.3
5013—2009
Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP)
312.10.2
5015—2009
Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF)
312.10.2
5020—2009
Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA)
312.10.2
5047—98
Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA)
312.10.2
5048—2009
Performance Requirements for Testing Double Check Valve Detector Assembly (DCDA)
312.10.2
5052—98
Performance Requirements for Testing Hose Connection Backflow Preventers
312.10.2
5056—98
Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB)
312.10.2
 
ASTM
ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
Standard reference number
Title
Referenced in code section number
ASTM
ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
Standard reference number
Title
Referenced in code section number
A 53/
A 53M—12
Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless
Table 702.1, Table 702.3, Table 1102.4
A 74—13A
Specification for Cast-iron Soil Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7
A 123—12
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Table 702.3, Table 1102.4
A 153 /
A 153M—16a
Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware
Table 702.4, Table 1102.7
A 312 /
A 312M—13a
Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes
Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 403 /
A 403M—11
Specification for Wrought Austenitic Stainless Steel Piping Fittings
Table 605.5, Table 605.8
A 518 /
A 518M—99 (2012)
Standard Specification for Corrosion-Resistant High- Silicon Iron Castings
Table 803.3.1
A 778—01 (2009) e1
Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products
Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 861—04 (2017)
Standard Specification for High-Silicon Iron Pipe and Fittings
Table 803.3.2
A 888—13A
Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
B 32—08
Specification for Solder Metal
605.14.6, 705.6.3, 705.7.3
B 42—10
Specification for Seamless Copper Pipe, Standard Sizes
Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 43—09
Specification for Seamless Red Brass Pipe, Standard Sizes
Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 62—17
Specification for Composition Bronze or Ounce Metal Castings
Table 605.5, Table 702.4, Table 1102.7
B 75—11
Specification for Seamless Copper Tube
Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 88—09
Specification for Seamless Copper Water Tube
Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6, Figure E103.3(2), Figure E103.3(3)
B 152 /
B 152M—13
Specification for Copper Sheet, Strip Plate and Rolled Bar
402.3, 417.5.2.4, 425.3.3, 902.2
B 251—10
Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 302—12
Specification for Threadless Copper Pipe, Standard Sizes
Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 447—12a
Specification for Welded Copper Tube
Table 605.4, Table 605.4.1, Table 1301.6
B 687— (2011)
Specification for Brass, Copper and Chromium-plated Pipe Nipples
Table 605.8
B 813—10
Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
605.14.6, 705.6.3, 705.7.3
B 828—02 (2010)
Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
605.14.6, 705.6.3, 705.7.3
C 4—04 (2009)
Specification for Clay Drain Tile and Perforated Clay Drain Tile
Table 702.3, Table 1102.4, Table 1102.5
C 14—11
Specification for Nonreinforced Concrete Sewer, Storm Drain and Culvert Pipe
Table 702.3, Table 1102.4
C 76—13a
Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe
Table 702.3, Table 1102.4
C 425—04 (2009)
Specification for Compression Joints for Vitrified Clay Pipe and Fittings
Table 702.4, 705.12, 705.16, Table 1102.7
C 443—12
Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
705.5, 705.16
C 564—12
Specification for Rubber Gaskets for Cast-iron Soil Pipe and Fittings
705.4.2, 705.4.3, 705.16
C 654—15
Standard Specification for Porous Concrete Pipe
Table 1102.5
C 700—13
Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
Table 702.3, Table 702.4, Table 1102.4, Table 1102.5
C 1053—00 (2010)
Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
Table 803.3.1, Table 803.3.2
C 1173—10e1
Specification for Flexible Transition Couplings for Underground Piping System
705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16,
C 1277—12
Specification for Shielded Coupling Joining Hubless Cast-iron Soil Pipe and Fittings
705.4.3
C 1440—08
Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
705.16
C 1460—08
Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
705.16
C 1461—08
Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use
705.16
C 1540—11
Specification for Heavy Duty Shielded Couplings Joining Hubless Cast-iron Soil Pipe and Fittings
705.4.3
C 1563—13
Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications
705.4.2
D 1586—11
Standard Test Method for Standard Penetration Test (SPT) and Split-barrel Sampling of Soils
1114.2.1
D 1587—15
Standard Practice for Thin-walled Tube Sampling of Soils for Geotechnical Purposes
1114.2.1
D 2235—04 (2011)
Specification for Solvent Cement for Acrylonitrile- Butadiene-Styrene (ABS) Plastic Pipe and Fittings
705.2.2
D 2464—15
Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Table 1102.7
D 2466—17
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
Table 1102.7
D 2467—15
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Table 1102.7
D 2564—12
Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
705.11.2
D 2657—07
Practice for Heat Fusion-joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings
705.13.1, Table 1102.7
D 2661—11
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.4, 705.2.2, Table 1102.7
D 2665—12
Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.7, Table 1403.2.1
D 2729—11
Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Table 1102.5, Table 1403.2
D 2751—05
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
Table 702.4, Table 1102.7
D 2846—09be1
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems
Table 1301.6
D 2855—96 (2010)
Standard Practice for Making Solvent-cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
705.11.2
D 2949—10
Specification for 3.25-in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Table 702.1, Table 702.4, Table 1403.2.1
D 3034—08
Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1
D 3212—07
Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
705.2.1, 705.11.1, 705.13.2
D 3311—11
Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns
Table 1102.7
D 3350—14
Specification for High Density Polyethylene Pipe (HPDE)
Table 1102.4, Table 1102.7
D 4068—09
Specification for Chlorinated Polyethlene (CPE) Sheeting for Concealed Water-containment Membrane
417.5.2.2
D 4551—12
Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-containment Membrane
417.5.2.1
F 405—05
Specification for Corrugated Polyethylene (PE) Pipe and Fittings
Table 1102.5, Table 1403.2, Table 1403.2.1
F 409—12
Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
424.1.2
F 437—15
Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 438—17
Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 439—13
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 477—10
Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
705.16
F 628—08
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
Table 702.1, Table 702.4, 705.2.2, Table 1102.7
F 656—10
Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings
705.11.2
F 891—10
Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core
Table 702.1 Table 702.2, Table 702.3, Table 1102.4, Table 1102.5
F 1412—09
Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage
Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7
F 1488—09e1
Specification for Coextruded Composite Pipe
Table 702.1, Table 702.2, Table 1403.2
F 1673—10
Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7
F 1866—07
Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
Table 702.4, Table 1102.7, Table 1403.2.1
F 2306 /
F 2306M—13
12'' to 60'' Annular Corrugated Profile-wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications
Table 702.4, Table 1102.7
F 2389—10
Specification for Pressure-rated Polypropylene (PP) Piping Systems
Table 1301.6, Table 1403.2, Table 1403.2.1
F 2618—15
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
Table 803.3.1, Table 803.3.2, 803.3.4.1.2
F 2764—17e1
Standard Specification for 6 to 60 in. Polypropylene (PP) Corrugated Double and Triple Wall Pipe
Table 1102.5
F 3219—17
Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
Table 1102.5
 
 
AWS
American Welding Society
8669 NW 36 Street, #130
Doral, FL 33166
Standard reference number
Title
Referenced in code section number
A5.8M /
A5.8—2011
Specifications for Filler Metals for Brazing and Braze Welding
605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1,
 
AWWA
American Water Works Association
6666 West Quincy Avenue
Denver, CO 80235
Standard reference number
Title
Referenced in code section number
AWWA
American Water Works Association
6666 West Quincy Avenue
Denver, CO 80235
Standard reference number
Title
Referenced in code section number
C110 /
A21.10—12
Ductile-iron and Gray-iron Fittings
Table 605.5, Table 702.4, Table 1102.7
C111 /
A21.11—12
Rubber-gasket Joints for Ductile-iron Pressure Pipe and Fittings
605.12
C115 /
A21.15—11
Flanged Ductile-iron Pipe with Ductile-iron or Gray-iron Threaded Flanges
Table 605.4, Table 605.4.1
C151 /
A21.51—02
Standard for Ductile-iron Pipe, Centrifugally Cast for Water
Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702.3, Table 1102.4
C153—00 /
A21.53—11
Ductile-iron Compact Fittings for Water Service
Table 605.5
C500—09
Standard for Metal-Seated Gate Valves for Water Supply Service
Table 605.7
C504—10
Standard for Rubber-Seated Butterfly Valves
Table 605.7
C507—11
Standard for Ball Valves, 6 In. Through 60 In
Table 605.7
C510—07
Double Check Valve Backflow Prevention Assembly
Table 608.1, 608.13.7
C511—07
Reduced-pressure Principle Backflow Prevention Assembly
Table 608.1, 608.13.2, 608.16.2
C651—05
Disinfecting Water Mains
610.1
C652—11
Disinfection of Water-storage Facilities
610.1
D100—2005
Standard for Welded Carbon Steel Tanks for Water Storage
1302.7.2, 1303.10.2
D115—2006
Standard for Tendon Prestressed-Concrete Water Tanks
1302.7.2, 1303.10.2
D120—2009
Standard for Thermosetting Fiberglass Reinforced Plastic Tanks
1302.7.2, 1303.10.2
 
 
CISPI
Cast Iron Soil Pipe Institute
5959 Shallowford Road, Suite 419
Chattanooga, TN 37421
Standard reference number
Title
Referenced in code section number
301—04a
Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications
Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
310—11
Specification for Coupling for Use in Connection with Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications
308.5.1, 308.6.1, 705.4.3
 
CSA
CSA Group
8501 East Pleasant Valley
Cleveland, OH 44131-5516
Standard reference number
Title
Referenced in code section number
CSA
CSA Group
8501 East Pleasant Valley
Cleveland, OH 44131-5516
Standard reference number
Title
Referenced in code section number
A257.1M—2009
Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings
Table 702.3, Table 1102.4
A257.2M—2009
Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings
Table 702.3, Table 1102.4
A257.3M—2009
Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets
705.5, 705.16
ASME A112.3.4—2013 /
CSA B45.9—2013
Macerating Systems and Related Components
712.4.1
ASME A112.18.1—2012 /
CSA B125.1—2012
Plumbing Supply Fittings
424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
ASME A112.18.2—2011 /
CSA B125.2—2011
Plumbing Waste Fittings
424.1.2
ASME A112.19.1—2013 /
CSA B45.2—2013
Enameled Cast-iron and Enameled Steel Plumbing Fixtures
407.1, 410.1, 415.1, 416.1, 418.1
ASME A112.19.2—2013 /
CSA B45.1—2013
Ceramic Plumbing Fixtures
401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
ASME A112.19.3—2008 /
CSA B45.4—08 (R2013)
Stainless-steel Plumbing Fixtures
405.9, 407.1, 415.1, 416.1, 418.1, 420.1
ASME A112.19.5—2011 /
CSA B45.15—2011
Flush Valves and Spuds for Water-closets, Urinals and Tanks
425.4
ASME A112.19.7—2012 /
CSA B45.10—2012
Hydromassage Bathtub Systems
421.1, 421.4
ASSE 1016 /
ASME A112.1016 /
CSA B125.16—2011
Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings
424.3, 424.4, 607.4
CSA B45.5—11 /
IAPMO Z124—2011
Plastic Plumbing Fixtures
407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
B64.1.1—11
Vacuum Breakers, Atmospheric Type (AVB)
425.2, Table 608.1, 608.13.6, 608.16.4.1
B64.1.2—11
Pressure Vacuum Breakers, (PVB)
Table 608.1, 608.13.5
B64.1.3—11
Spill Resistant Pressure Vacuum Breaks (SRPVB)
608.13.8
B64.2—11
Vacuum Breakers, Hose Connection Type (HCVB)
Table 608.1, 608.13.6
B64.2.1—11
Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature
Table 608.1, 608.13.6
B64.2.1.1—11
Hose Connection Dual Check Vacuum Breakers, (HCDVB)
Table 608.1, 608.13.6
B64.2.2—11
Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature
Table 608.1, 608.13.6
B64.3—11
Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP)
Table 608.1, 608.13.3, 608.16.2
B64.4—11
Backflow Preventers, Reduced Pressure Principle Type (RP)
Table 608.1, 608.13.2
B64.4.1—11
Reduced Pressure Principle for Fire Sprinklers (RPF)
Table 608.1, 608.13.2
B64.5—11
Double Check Backflow Preventers (DCVA)
Table 608.1, 608.13.7
B64.5.1—11
Double Check Valve Backflow Preventer for Fire Systems (DCVAF)
Table 608.1 608.13.7
B64.6—11
Dual Check Backflow Preventers Valve (DuC)
Table 608.1, 608.13.10
B64.7—11
Laboratory Faucet Vacuum Breakers (LFVB)
Table 608.1, 608.13.6
B64.10—11
Manual for the Selection and Installation of Backflow Prevention Devices
312.10.2
B64.10.1—11
Maintenance and Field Testing of Backflow Preventers
312.10.2
B79—08 (R2013)
Commercial and Residential Drains, and Cleanouts
412.1
B125.3—2012
Plumbing Fittings
408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7
B137.2—02
PVC Injection-Moulded Gasketed Fittings for Pressure Applications
Table 1102.7
B137.3—13
Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications
705.11.2
B181.1—11
Acrylonitrile-butadiene-styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings
Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7
B181.2—11
Polyvinylchloride PVC and chlorinated polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings
Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4
B181.3—11
Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems
Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7
B182.1—11
Plastic Drain and Sewer Pipe and Pipe Fittings
705.11.2, Table 1102.5
B182.2—11
PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings
Table 702.3, Table 1102.4, Table 1102.5
B182.4—11
Profile Polyvinylchloride PVC Sewer Pipe and Fittings
Table 702.3, Table 1102.4, Table 1102.5
B182.6—11
Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak- proof Sewer Applications
Table 1102.5
B182.8—11
Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings
Table 1102.5
B356—10
Water Pressure Reducing Valves for Domestic Water Systems
604.8
B483.1—14
Drinking Water Treatment Units
611.1, 611.2
B602—10
Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe
705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16
 
 
IAPMO
IAPMO Group
4755 E. Philadelphia
Ontario, CA 91761
Standard reference number
Title
Referenced in code section number
PS 117—08
Copper and Copper Allow Tubing System Incorporating Press-type or Nail-type Connections
605.14.4
CSA B45.5—11 /
IAPMO Z124—2011
Plastic Plumbing Fixtures
407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
 
 
ICC
International Code Council, Inc.
500 New Jersey Ave, NW
6th Floor
Washington, DC 20001
Standard reference number
Title
Referenced in code section number
A117.1—2009
Accessible and Usable Buildings and Facilities
404.2, 410.1
 
 
ISEA
International Safety Equipment Association
1901 N. Moore Street, Suite 808
Arlington, VA 22209
Standard reference number
Title
Referenced in code section number
ANSI / ISEA Z358.1—2009
Emergency Eyewash and Shower Equipment
411.1
 
MSS
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
127 Park St. NE
Vienna, VA 22180-4602
Standard reference number
Title
Referenced in code section number
MSS
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
127 Park St. NE
Vienna, VA 22180-4602
Standard reference number
Title
Referenced in code section number
SP-67—2011
Butterfly Valves
Table 605.7
SP-70—2011
Gray Iron Gate Valves, Flanged and Threaded Ends
Table 605.7
SP-71—2011
Gray Iron Swing Check Valves, Flanged and Threaded Ends
Table 605.7
SP-72—2010
Ball Valves with Flanged or Butt-Welding Ends for General Service
Table 605.7
SP-78—2011
Cast Iron Plug Valves, Flanged and Threaded Ends
Table 605.7
SP-80—2008
Bronze Gate, Globe, Angle and Check Valves
Table 605.7
SP-110—2010
Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends
Table 605.7
 
 
NFPA
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
Standard reference number
Title
Referenced in code section number
51—13
Design and Installation of Oxygen-fuel Gas Systems for Welding, Cutting and Allied Processes
1201.1, 1203.1
55—13
Compressed Gases and Cryogenic Fluids Code
1201.1, 1203.1
99—15
Health Care Facilities Code
1201.1, 1202.1
 
NSF
NSF International
789 Dixboro Road
Ann Arbor, MI 48105
Standard reference number
Title
Referenced in code section number
NSF
NSF International
789 Dixboro Road
Ann Arbor, MI 48105
Standard reference number
Title
Referenced in code section number
3—2010
Commercial Warewashing Equipment
409.1
14—2011
Plastic Piping System Components and Related Materials
303.3, 611.3
18—2012
Manual Food and Beverage Dispensing Equipment
426.1
42—2011
Drinking Water Treatment Units-Aesthetic Effects
611.1, 611.3
44—2012
Residential Cation Exchange Water Softeners
611.1, 611.3
53—2011a
Drinking Water Treatment Units—Health Effects
611.1, 611.3
58—2012
Reverse Osmosis Drinking Water Treatment Systems
611.2, 611.3
61—2012
Drinking Water System Components—Health Effects
410.1, 424.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3
62—2012
Drinking Water Distillation Systems
611.1
372—2010
Drinking Water Systems Components—Lead Content
605.2
 
 
PDI
Plumbing and Drainage Institute
800 Turnpike Street, Suite 300
North Andover, MA 01845
Standard reference number
Title
Referenced in code section number
G101 (2012)
Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Installation Data
1003.3.4
 
UL
UL LLC
333 Pfingsten Road
Northbrook, IL 60062-2096
Standard reference number
Title
Referenced in code section number
UL
UL LLC
333 Pfingsten Road
Northbrook, IL 60062-2096
Standard reference number
Title
Referenced in code section number
58—1996
Steel Underground Tanks for Flammable and Combustible Liquids—with revisions through July 27, 1998
1302.7.2, 1303.10.2
142—2006
Steel Aboveground Tanks for Flammable and Combustible Liquids—with revisions through February 12, 2010
1302.7.2, 1303.10.2
174—2004
Household Electric Storage Tank Water Heaters—with revisions through September 2012
502.1
430—2009
Waste Disposers—with revisions through March 23, 2011
413.1
732—1995
Oil-fired Storage Tank Water Heaters—with revisions through April 2010
502.1
921—2004
Integral gas fired heating commercial dishwashers
409.1
1316—1994
Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols and Alcohol Gasoline Mixtures—with revisions through May 12, 2006
1302.7.2, 1303.10.2
1453—2004
Electric Booster and Commercial Storage Tank Water Heaters—with revisions through July 2011
502.1
1746—2007
External Corrosion Protection Systems for Steel Underground Storage Tanks
1302.7.2, 1303.10.2
1795—2009
Hydromassage Bathtubs including revisions through August 23, 2011
421.1
 
 
WaterSense
WaterSense U.S. Environmental Protection Agency
Office of Wastewater Management (4204M)
1200 Pennsylvania Avenue, N.W.
Washington, D.C. 20460
Standard reference number
Title
Referenced in code section number
v.1.0—October 1, 2007
High-efficiency Lavatory Faucet Specifications
604.4.1
v.1.0—October 8, 2009
WaterSense Specification for Flushing Urinals
604.4.1
v.1.0—December 17, 2015
WaterSense Specification for Flushometer-Valve Water Closets
604.4.1
v.1.1—July 26, 2018
WaterSense Specification for Showerheads
604.4.1
v.1.2—June 2, 2014
WaterSense Specification for Tank-Type Toilets
604.4.1
 
Appendix A: Reserved
Appendix B: Reserved
Appendix C: Structural Safety
Section PC C101: Cutting, Notching and Boring

Disclaimer: The Codes and other documents that appear on this site may not yet reflect the most current legislation or rules adopted by the City. In addition, certain textual errors and omissions may temporarily exist, resulting from problems in the source database provided to American Legal and from which this website was created. Although these errors and omissions are being corrected, any user discovering any such error is invited to please contact the publisher at NYC.editor@amlegal.com or at 800-445-5588 and/or the New York City Law Department at NYCCodeRulesCharter@law.nyc.gov.

Hosted by: American Legal Publishing

Back to Code Library
Previous Doc
Next Doc