Section PC 1502: Standards

 

AHRI	Air-Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203
Standard reference number	Title	Referenced in code section number
1010—02	Self-contained, Mechanically Refrigerated Drinking-Water Coolers	410.1
810—16 Addendum 1	Performance Rating of Automatic Commercial Ice-makers	428.1.1

 

 

ANSI	American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036
Standard reference number	Title	Referenced in code section number
A118.10—99	Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation	417.5.2.5, 417.5.2.6
Z4.3—95	Minimum Requirements for Nonsewered Waste-disposal Systems	311.1
Z21.22—99 (R2003)	Relief Valves for Hot Water Supply Systems with Addenda Z21.22a—2000 (R2003) and Z21.22b—2001 (R2003)	504.2, 504.4, 504.4.1
CSA B45.5—11 / IAPMO Z124—11	Plastic Plumbing Fixtures	407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1

 

 

API	American Petroleum Institute 1220 L Street NW Washington, DC 20005-4070
Standard reference number	Title	Referenced in code section number
12D – 2008	Specification for Field Welded Tanks for Storage of Production Liquids, effective April 1, 2009	1302.7.2, 1303.10.2
12F – 2008	Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009	1302.7.2, 1303.10.2

 

 

ASCE/SEI	American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191-4400
Standard reference number	Title	Referenced in code section number
24—14	Flood Resistant Design and Construction	715.1, 1101.9.1

 

ASME	American Society of Mechanical Engineers Three Park Avenue New York, NY 10016-5990
Standard reference number	Title	Referenced in code section number
A112.1.2—2004	Air Gaps in Plumbing Systems	406.1, 409.2, Table 608.1, 608.13.1
A112.1.3—2000 (R2011)	Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances	406.1, 409.2, Table 608.1, 608.13.1
A112.3.1—2007	Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground	412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7
A112.3.4—2013 / CSA B45.9—2013	Macerating Toilet Systems and Related Components	712.4.1
A112.4.1—2009	Water Heater Relief Valve Drain Tubes	504.6
A112.4.2—2009	Water Closet Personal Hygiene Devices	424.9
A112.4.3—1999 (R2010)	Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System	405.4
A112.4.14—2004 (R2010)	Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems	Table 605.7
A112.6.1M—1997 (R2008)	Floor-affixed Supports for Off-the-floor Plumbing Fixtures for Public Use	405.4.3
A112.6.2—2000 (R2010)	Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks	405.4.3
A112.6.3—2001 (R2007)	Floor and Trench Drains	412.1
A112.6.4—2003 (R2008)	Roof, Deck, and Balcony Drains	1102.6
A112.6.7—2010	Enameled and Epoxy-coated Cast-iron and PVC Plastic Sanitary Floor Sinks	427.1
A112.6.9—2005 (R2010)	Siphonic Roof Drains	1107.1
A112.14.1—2003	Backwater Valves	715.2
A112.14.3—2000	Grease Interceptors	1003.3.4
A112.14.4—2001 (Reaffirmed 2007)	Grease Removal Devices	1003.3.4
A112.18.1—2012 / CSA B125.1—2012	Plumbing Supply Fittings	424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
A112.18.2—2011 / CSA B125.2—2011	Plumbing Waste Fittings	424.1.2
A112.18.3—2002 (Reaffirmed 2008)	Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings	424.2, 424.6
A112.18.6 / CSA B125.6—2009	Flexible Water Connectors	605.6
A112.18.9—2011	Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures	404.3
A112.19.1—2013 / CSA B45.2—2013	Enameled Cast Iron and Enameled Steel Plumbing Fixtures	407.1, 410.1, 415.1, 416.1, 418.1
A112.19.2—2013 / CSA B45.1—2013	Ceramic Plumbing Fixtures	401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
A112.19.3— 2008 / CSA B45.4—2008 (R2013)	Stainless Steel Plumbing Fixtures	405.9, 407.1, 415.1, 416.1, 418.1, 420.1
A112.19.5—2011 / CSA B45.15—2011	Flush Valves and Spuds for Water-closets, Urinals, and Tanks	425.4
A112.19.7M—2012 / CSA B45.10—2012	Hydromassage Bathtub Systems	421.1, 421.4
A112.19.12—2006	Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems	416.4, 418.3
A112.19.14—2006 (R2011)	Six-Liter Water Closets Equipped with a Dual Flushing Device	420.1
A112.19.15—2005	Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors	407.4, 421.6
A112.19.19—2006	Vitreous China Nonwater Urinals	419.1
A112.21.3—1985 (R2007)	Hydrants for Utility and Maintenance Use	Table 608.1, 608.13.6
A112.36.2M—1991 (R2008)	Cleanouts	709.1.10.2
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011	Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings	424.3, 424.4, 607.4
B1.20.1—1983 (R2006)	Pipe Threads, General Purpose (inch)	605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3
B16.3—2011	Malleable Iron Threaded Fittings Classes 150 and 300	Table 702.4, Table 1102.7
B16.4—2011	Gray Iron Threaded Fittings Classes 125 and 250	Table 605.5, Table 702.4, Table 1102.7
B16.12—2009	Cast-iron Threaded Drainage Fittings	Table 702.4, Table 1102.7
B16.15—2011	Cast Bronze Threaded Fittings	Table 605.5, Table 702.4
B16.18—2012	Cast Copper Alloy Solder Joint Pressure Fittings	Table 605.5, Table 702.4
B16.22—2001 (R2010)	Wrought Copper and Copper Alloy Solder Joint Pressure Fittings	Table 605.5, Table 702.4
B16.23—2011	Cast Copper Alloy Solder Joint Drainage Fittings (DWV)	Table 702.4
B16.26—2011	Cast Copper Alloy Fittings for Flared Copper Tubes	Table 605.5, Table 702.4
B16.29—2012	Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV)	Table 702.4
B31.9—2017	Building Services Piping	605.23.2
BPVC—2010	Boiler and Pressure Vessel Code	312.11.1, 501.2

 

 

ASPE	American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656-1116
Standard reference number	Title	Referenced in code section number
45—2013	Siphonic Roof Drainage Systems	1107.1

 

ASSE	American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145
Standard reference number	Title	Referenced in code section number
1001—08	Performance Requirements for Atmospheric Type Vacuum Breakers	425.2, Table 608.1, 608.13.6, 608.16.4.1
1002—08	Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks	425.3.1, Table 608.1
1003—09	Performance Requirements for Water Pressure Reducing Valves	604.8
1004—08	Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines	409.1
1008—06	Performance Requirements for Plumbing Aspects of Food Waste Disposer Units	413.1
1010—04	Performance Requirements for Water Hammer Arresters	604.9
1011—04	Performance Requirements for Hose Connection Vacuum Breakers	Table 608.1, 608.13.6
1012—09	Performance Requirements for Backflow Preventers with Intermediate Atmospheric Vent	Table 608.1, 608.13.3, 608.16.2
1013—09	Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers	Table 608.1, 608.13.2, 608.16.2
1015—09	Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies	Table 608.1, 608.13.7
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011	Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings	424.3, 424.4, 607.4, 613.1
1017—2010	Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems	501.2.3, 613.1
1018—2010	Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied	1002.4.1.1, 1002.4.1.2
1019—2010	Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type	Table 608.1, 608.13.6,
1020—04	Performance Requirements for Pressure Vacuum Breaker Assembly	Table 608.1, 608.13.5
1022—03	Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment	Table 608.1, 608.16.1, 608.16.10
1024—04	Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets)	Table 608.1, 608.13.10
1035—08	Performance Requirements for Laboratory Faucet Backflow Preventers	Table 608.1, 608.13.6
1037—90	Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures	425.2
1047—2009	Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies	Table 608.1, 608.13.2
1048—2009	Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies	Table 608.1, 608.13.7
1052—04	Performance Requirements for Hose Connection Backflow Preventers	Table 608.1, 608.13.6
1055—2009	Performance Requirements for Chemical Dispensing Systems	608.13.9
1056—2010	Performance Requirements for Spill Resistant Vacuum Breaker	Table 608.1, 608.13.5, 608.13.8
1060—2006	Performance Requirements for Outdoor Enclosures for Fluid Conveying Components	608.14.1
1061—2010	Performance Requirements for Removable and Nonremovable Push Fit Fittings	Table 605.5, 605.14.4
1062—2006	Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings	424.7
1066—2009	Performance Requirements for Individual Pressure Balancing In-line Valves for Individual Fixture Fittings	604.11
1069—05	Performance Requirements for Automatic Temperature Control Mixing Valves	424.4
1070—04	Performance Requirements for Water-temperature Limiting Devices	408.3, 416.5, 423.3, 424.5, 607.1.2
1079—2005	Performance Requirements for Dielectric Pipe Unions	605.24.1, 605.24.3
5013—2009	Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP)	312.10.2
5015—2009	Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF)	312.10.2
5020—2009	Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA)	312.10.2
5047—98	Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA)	312.10.2
5048—2009	Performance Requirements for Testing Double Check Valve Detector Assembly (DCDA)	312.10.2
5052—98	Performance Requirements for Testing Hose Connection Backflow Preventers	312.10.2
5056—98	Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB)	312.10.2

 

ASTM	ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
Standard reference number	Title	Referenced in code section number
A 53/ A 53M—12	Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless	Table 702.1, Table 702.3, Table 1102.4
A 74—13A	Specification for Cast-iron Soil Pipe and Fittings	Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7
A 123—12	Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products	Table 702.3, Table 1102.4
A 153 / A 153M—16a	Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware	Table 702.4, Table 1102.7
A 312 / A 312M—13a	Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes	Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 403 / A 403M—11	Specification for Wrought Austenitic Stainless Steel Piping Fittings	Table 605.5, Table 605.8
A 518 / A 518M—99 (2012)	Standard Specification for Corrosion-Resistant High- Silicon Iron Castings	Table 803.3.1
A 778—01 (2009) e1	Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products	Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 861—04 (2017)	Standard Specification for High-Silicon Iron Pipe and Fittings	Table 803.3.2
A 888—13A	Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application	Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
B 32—08	Specification for Solder Metal	605.14.6, 705.6.3, 705.7.3
B 42—10	Specification for Seamless Copper Pipe, Standard Sizes	Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 43—09	Specification for Seamless Red Brass Pipe, Standard Sizes	Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 62—17	Specification for Composition Bronze or Ounce Metal Castings	Table 605.5, Table 702.4, Table 1102.7
B 75—11	Specification for Seamless Copper Tube	Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 88—09	Specification for Seamless Copper Water Tube	Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6, Figure E103.3(2), Figure E103.3(3)
B 152 / B 152M—13	Specification for Copper Sheet, Strip Plate and Rolled Bar	402.3, 417.5.2.4, 425.3.3, 902.2
B 251—10	Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube	Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 302—12	Specification for Threadless Copper Pipe, Standard Sizes	Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 447—12a	Specification for Welded Copper Tube	Table 605.4, Table 605.4.1, Table 1301.6
B 687— (2011)	Specification for Brass, Copper and Chromium-plated Pipe Nipples	Table 605.8
B 813—10	Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube	605.14.6, 705.6.3, 705.7.3
B 828—02 (2010)	Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings	605.14.6, 705.6.3, 705.7.3
C 4—04 (2009)	Specification for Clay Drain Tile and Perforated Clay Drain Tile	Table 702.3, Table 1102.4, Table 1102.5
C 14—11	Specification for Nonreinforced Concrete Sewer, Storm Drain and Culvert Pipe	Table 702.3, Table 1102.4
C 76—13a	Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe	Table 702.3, Table 1102.4
C 425—04 (2009)	Specification for Compression Joints for Vitrified Clay Pipe and Fittings	Table 702.4, 705.12, 705.16, Table 1102.7
C 443—12	Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets	705.5, 705.16
C 564—12	Specification for Rubber Gaskets for Cast-iron Soil Pipe and Fittings	705.4.2, 705.4.3, 705.16
C 654—15	Standard Specification for Porous Concrete Pipe	Table 1102.5
C 700—13	Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated	Table 702.3, Table 702.4, Table 1102.4, Table 1102.5
C 1053—00 (2010)	Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications	Table 803.3.1, Table 803.3.2
C 1173—10e1	Specification for Flexible Transition Couplings for Underground Piping System	705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16,
C 1277—12	Specification for Shielded Coupling Joining Hubless Cast-iron Soil Pipe and Fittings	705.4.3
C 1440—08	Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems	705.16
C 1460—08	Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground	705.16
C 1461—08	Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use	705.16
C 1540—11	Specification for Heavy Duty Shielded Couplings Joining Hubless Cast-iron Soil Pipe and Fittings	705.4.3
C 1563—13	Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications	705.4.2
D 1586—11	Standard Test Method for Standard Penetration Test (SPT) and Split-barrel Sampling of Soils	1114.2.1
D 1587—15	Standard Practice for Thin-walled Tube Sampling of Soils for Geotechnical Purposes	1114.2.1
D 2235—04 (2011)	Specification for Solvent Cement for Acrylonitrile- Butadiene-Styrene (ABS) Plastic Pipe and Fittings	705.2.2
D 2464—15	Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80	Table 1102.7
D 2466—17	Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40	Table 1102.7
D 2467—15	Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80	Table 1102.7
D 2564—12	Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems	705.11.2
D 2657—07	Practice for Heat Fusion-joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings	705.13.1, Table 1102.7
D 2661—11	Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings	Table 702.1, Table 702.4, 705.2.2, Table 1102.7
D 2665—12	Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings	Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.7, Table 1403.2.1
D 2729—11	Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings	Table 1102.5, Table 1403.2
D 2751—05	Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings	Table 702.4, Table 1102.7
D 2846—09be1	Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems	Table 1301.6
D 2855—96 (2010)	Standard Practice for Making Solvent-cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings	705.11.2
D 2949—10	Specification for 3.25-in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings	Table 702.1, Table 702.4, Table 1403.2.1
D 3034—08	Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings	Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1
D 3212—07	Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals	705.2.1, 705.11.1, 705.13.2
D 3311—11	Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns	Table 1102.7
D 3350—14	Specification for High Density Polyethylene Pipe (HPDE)	Table 1102.4, Table 1102.7
D 4068—09	Specification for Chlorinated Polyethlene (CPE) Sheeting for Concealed Water-containment Membrane	417.5.2.2
D 4551—12	Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-containment Membrane	417.5.2.1
F 405—05	Specification for Corrugated Polyethylene (PE) Pipe and Fittings	Table 1102.5, Table 1403.2, Table 1403.2.1
F 409—12	Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings	424.1.2
F 437—15	Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80	Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 438—17	Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40	Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 439—13	Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80	Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 477—10	Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe	705.16
F 628—08	Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core	Table 702.1, Table 702.4, 705.2.2, Table 1102.7
F 656—10	Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings	705.11.2
F 891—10	Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core	Table 702.1 Table 702.2, Table 702.3, Table 1102.4, Table 1102.5
F 1412—09	Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage	Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7
F 1488—09e1	Specification for Coextruded Composite Pipe	Table 702.1, Table 702.2, Table 1403.2
F 1673—10	Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems	Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7
F 1866—07	Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings	Table 702.4, Table 1102.7, Table 1403.2.1
F 2306 / F 2306M—13	12'' to 60'' Annular Corrugated Profile-wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications	Table 702.4, Table 1102.7
F 2389—10	Specification for Pressure-rated Polypropylene (PP) Piping Systems	Table 1301.6, Table 1403.2, Table 1403.2.1
F 2618—15	Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems	Table 803.3.1, Table 803.3.2, 803.3.4.1.2
F 2764—17e1	Standard Specification for 6 to 60 in. Polypropylene (PP) Corrugated Double and Triple Wall Pipe	Table 1102.5
F 3219—17	Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings	Table 1102.5

 

 

AWS	American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166
Standard reference number	Title	Referenced in code section number
A5.8M / A5.8—2011	Specifications for Filler Metals for Brazing and Braze Welding	605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1,

 

AWWA	American Water Works Association 6666 West Quincy Avenue Denver, CO 80235
Standard reference number	Title	Referenced in code section number
C110 / A21.10—12	Ductile-iron and Gray-iron Fittings	Table 605.5, Table 702.4, Table 1102.7
C111 / A21.11—12	Rubber-gasket Joints for Ductile-iron Pressure Pipe and Fittings	605.12
C115 / A21.15—11	Flanged Ductile-iron Pipe with Ductile-iron or Gray-iron Threaded Flanges	Table 605.4, Table 605.4.1
C151 / A21.51—02	Standard for Ductile-iron Pipe, Centrifugally Cast for Water	Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702.3, Table 1102.4
C153—00 / A21.53—11	Ductile-iron Compact Fittings for Water Service	Table 605.5
C500—09	Standard for Metal-Seated Gate Valves for Water Supply Service	Table 605.7
C504—10	Standard for Rubber-Seated Butterfly Valves	Table 605.7
C507—11	Standard for Ball Valves, 6 In. Through 60 In	Table 605.7
C510—07	Double Check Valve Backflow Prevention Assembly	Table 608.1, 608.13.7
C511—07	Reduced-pressure Principle Backflow Prevention Assembly	Table 608.1, 608.13.2, 608.16.2
C651—05	Disinfecting Water Mains	610.1
C652—11	Disinfection of Water-storage Facilities	610.1
D100—2005	Standard for Welded Carbon Steel Tanks for Water Storage	1302.7.2, 1303.10.2
D115—2006	Standard for Tendon Prestressed-Concrete Water Tanks	1302.7.2, 1303.10.2
D120—2009	Standard for Thermosetting Fiberglass Reinforced Plastic Tanks	1302.7.2, 1303.10.2

 

 

CISPI	Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421
Standard reference number	Title	Referenced in code section number
301—04a	Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications	Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
310—11	Specification for Coupling for Use in Connection with Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications	308.5.1, 308.6.1, 705.4.3

 

CSA	CSA Group 8501 East Pleasant Valley Cleveland, OH 44131-5516
Standard reference number	Title	Referenced in code section number
A257.1M—2009	Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings	Table 702.3, Table 1102.4
A257.2M—2009	Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings	Table 702.3, Table 1102.4
A257.3M—2009	Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets	705.5, 705.16
ASME A112.3.4—2013 / CSA B45.9—2013	Macerating Systems and Related Components	712.4.1
ASME A112.18.1—2012 / CSA B125.1—2012	Plumbing Supply Fittings	424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
ASME A112.18.2—2011 / CSA B125.2—2011	Plumbing Waste Fittings	424.1.2
ASME A112.19.1—2013 / CSA B45.2—2013	Enameled Cast-iron and Enameled Steel Plumbing Fixtures	407.1, 410.1, 415.1, 416.1, 418.1
ASME A112.19.2—2013 / CSA B45.1—2013	Ceramic Plumbing Fixtures	401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
ASME A112.19.3—2008 / CSA B45.4—08 (R2013)	Stainless-steel Plumbing Fixtures	405.9, 407.1, 415.1, 416.1, 418.1, 420.1
ASME A112.19.5—2011 / CSA B45.15—2011	Flush Valves and Spuds for Water-closets, Urinals and Tanks	425.4
ASME A112.19.7—2012 / CSA B45.10—2012	Hydromassage Bathtub Systems	421.1, 421.4
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011	Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings	424.3, 424.4, 607.4
CSA B45.5—11 / IAPMO Z124—2011	Plastic Plumbing Fixtures	407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
B64.1.1—11	Vacuum Breakers, Atmospheric Type (AVB)	425.2, Table 608.1, 608.13.6, 608.16.4.1
B64.1.2—11	Pressure Vacuum Breakers, (PVB)	Table 608.1, 608.13.5
B64.1.3—11	Spill Resistant Pressure Vacuum Breaks (SRPVB)	608.13.8
B64.2—11	Vacuum Breakers, Hose Connection Type (HCVB)	Table 608.1, 608.13.6
B64.2.1—11	Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature	Table 608.1, 608.13.6
B64.2.1.1—11	Hose Connection Dual Check Vacuum Breakers, (HCDVB)	Table 608.1, 608.13.6
B64.2.2—11	Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature	Table 608.1, 608.13.6
B64.3—11	Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP)	Table 608.1, 608.13.3, 608.16.2
B64.4—11	Backflow Preventers, Reduced Pressure Principle Type (RP)	Table 608.1, 608.13.2
B64.4.1—11	Reduced Pressure Principle for Fire Sprinklers (RPF)	Table 608.1, 608.13.2
B64.5—11	Double Check Backflow Preventers (DCVA)	Table 608.1, 608.13.7
B64.5.1—11	Double Check Valve Backflow Preventer for Fire Systems (DCVAF)	Table 608.1 608.13.7
B64.6—11	Dual Check Backflow Preventers Valve (DuC)	Table 608.1, 608.13.10
B64.7—11	Laboratory Faucet Vacuum Breakers (LFVB)	Table 608.1, 608.13.6
B64.10—11	Manual for the Selection and Installation of Backflow Prevention Devices	312.10.2
B64.10.1—11	Maintenance and Field Testing of Backflow Preventers	312.10.2
B79—08 (R2013)	Commercial and Residential Drains, and Cleanouts	412.1
B125.3—2012	Plumbing Fittings	408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7
B137.2—02	PVC Injection-Moulded Gasketed Fittings for Pressure Applications	Table 1102.7
B137.3—13	Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications	705.11.2
B181.1—11	Acrylonitrile-butadiene-styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings	Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7
B181.2—11	Polyvinylchloride PVC and chlorinated polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings	Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4
B181.3—11	Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems	Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7
B182.1—11	Plastic Drain and Sewer Pipe and Pipe Fittings	705.11.2, Table 1102.5
B182.2—11	PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings	Table 702.3, Table 1102.4, Table 1102.5
B182.4—11	Profile Polyvinylchloride PVC Sewer Pipe and Fittings	Table 702.3, Table 1102.4, Table 1102.5
B182.6—11	Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak- proof Sewer Applications	Table 1102.5
B182.8—11	Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings	Table 1102.5
B356—10	Water Pressure Reducing Valves for Domestic Water Systems	604.8
B483.1—14	Drinking Water Treatment Units	611.1, 611.2
B602—10	Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe	705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16

 

 

IAPMO	IAPMO Group 4755 E. Philadelphia Ontario, CA 91761
Standard reference number	Title	Referenced in code section number
PS 117—08	Copper and Copper Allow Tubing System Incorporating Press-type or Nail-type Connections	605.14.4
CSA B45.5—11 / IAPMO Z124—2011	Plastic Plumbing Fixtures	407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1

 

 

ICC	International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001
Standard reference number	Title	Referenced in code section number
A117.1—2009	Accessible and Usable Buildings and Facilities	404.2, 410.1

 

 

ISEA	International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209
Standard reference number	Title	Referenced in code section number
ANSI / ISEA Z358.1—2009	Emergency Eyewash and Shower Equipment	411.1

 

MSS	Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180-4602
Standard reference number	Title	Referenced in code section number
SP-67—2011	Butterfly Valves	Table 605.7
SP-70—2011	Gray Iron Gate Valves, Flanged and Threaded Ends	Table 605.7
SP-71—2011	Gray Iron Swing Check Valves, Flanged and Threaded Ends	Table 605.7
SP-72—2010	Ball Valves with Flanged or Butt-Welding Ends for General Service	Table 605.7
SP-78—2011	Cast Iron Plug Valves, Flanged and Threaded Ends	Table 605.7
SP-80—2008	Bronze Gate, Globe, Angle and Check Valves	Table 605.7
SP-110—2010	Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends	Table 605.7

 

 

NFPA	National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471
Standard reference number	Title	Referenced in code section number
51—13	Design and Installation of Oxygen-fuel Gas Systems for Welding, Cutting and Allied Processes	1201.1, 1203.1
55—13	Compressed Gases and Cryogenic Fluids Code	1201.1, 1203.1
99—15	Health Care Facilities Code	1201.1, 1202.1

 

NSF	NSF International 789 Dixboro Road Ann Arbor, MI 48105
Standard reference number	Title	Referenced in code section number
3—2010	Commercial Warewashing Equipment	409.1
14—2011	Plastic Piping System Components and Related Materials	303.3, 611.3
18—2012	Manual Food and Beverage Dispensing Equipment	426.1
42—2011	Drinking Water Treatment Units-Aesthetic Effects	611.1, 611.3
44—2012	Residential Cation Exchange Water Softeners	611.1, 611.3
53—2011a	Drinking Water Treatment Units—Health Effects	611.1, 611.3
58—2012	Reverse Osmosis Drinking Water Treatment Systems	611.2, 611.3
61—2012	Drinking Water System Components—Health Effects	410.1, 424.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3
62—2012	Drinking Water Distillation Systems	611.1
372—2010	Drinking Water Systems Components—Lead Content	605.2

 

 

PDI	Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845
Standard reference number	Title	Referenced in code section number
G101 (2012)	Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Installation Data	1003.3.4

 

UL	UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096
Standard reference number	Title	Referenced in code section number
58—1996	Steel Underground Tanks for Flammable and Combustible Liquids—with revisions through July 27, 1998	1302.7.2, 1303.10.2
142—2006	Steel Aboveground Tanks for Flammable and Combustible Liquids—with revisions through February 12, 2010	1302.7.2, 1303.10.2
174—2004	Household Electric Storage Tank Water Heaters—with revisions through September 2012	502.1
430—2009	Waste Disposers—with revisions through March 23, 2011	413.1
732—1995	Oil-fired Storage Tank Water Heaters—with revisions through April 2010	502.1
921—2004	Integral gas fired heating commercial dishwashers	409.1
1316—1994	Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols and Alcohol Gasoline Mixtures—with revisions through May 12, 2006	1302.7.2, 1303.10.2
1453—2004	Electric Booster and Commercial Storage Tank Water Heaters—with revisions through July 2011	502.1
1746—2007	External Corrosion Protection Systems for Steel Underground Storage Tanks	1302.7.2, 1303.10.2
1795—2009	Hydromassage Bathtubs including revisions through August 23, 2011	421.1

 

 

WaterSense	WaterSense U.S. Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460
Standard reference number	Title	Referenced in code section number
v.1.0—October 1, 2007	High-efficiency Lavatory Faucet Specifications	604.4.1
v.1.0—October 8, 2009	WaterSense Specification for Flushing Urinals	604.4.1
v.1.0—December 17, 2015	WaterSense Specification for Flushometer-Valve Water Closets	604.4.1
v.1.1—July 26, 2018	WaterSense Specification for Showerheads	604.4.1
v.1.2—June 2, 2014	WaterSense Specification for Tank-Type Toilets	604.4.1

 

Appendix A: Reserved

Appendix B: Reserved