Loading...
Lighting systems in covered buildings shall be upgraded as provided for in this article.
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088.
As used in this article, the following terms shall have the following meanings:
COVERED BUILDING. As it appears in the records of the department of finance: (i) a building that exceeds 25,000 gross square feet (2323 m
2
), (ii) two or more buildings on the same tax lot that together exceed 100,000 gross square feet (9290 m
2
), or (iii) two or more buildings held in the condominium form of ownership that are governed by the same board of managers and that together exceed 100,000 gross square feet (9290 m
2
).
Exceptions: The term "covered building" shall not include:
1. Real property classified as class one pursuant to subdivision 1 of section 1802 of the New York state real property tax law; or
2. Real property, not more than three stories, consisting of a series of attached, detached or semi-detached dwellings, for which ownership and the responsibility for maintenance of the HVAC systems and hot water heating systems is held by each individual dwelling unit owner, and with no HVAC system or hot water heating system in the series serving more than two dwelling units, as certified by a registered design professional to the department.
(Am. L.L. 2016/134, 10/31/2016, eff. 10/31/2016; Am. L.L. 2021/126, 11/7/2021, eff. 11/7/2022; Am. L.L. 2023/077, 6/11/2023, eff. 6/11/2023)
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088, L.L. 2021/126 and L.L. 2023/077.
No later than January 1, 2025 the lighting systems of covered buildings shall be in compliance with the standards for new systems set forth in the New York city energy conservation code and/or applicable standards referenced in such energy code. The owner of a covered building shall ensure that the upgrade of the lighting system of the entire covered building is completed on or prior to such date and shall file a report with the department, in accordance with the rules of the department, prepared by a registered design professional or a licensed master or special electrician certifying that such upgrade has been completed and that the work is in compliance with the technical standards of the New York city electrical code. The department may impose a fee for filing and review of such reports.
Exceptions:
1. An element of a lighting system that is in compliance with the standards of the New York city energy conservation code and/or applicable standards referenced in such code as in effect for new systems installed on or after July 1, 2010.
2. Lighting power densities in any space bounded by permanent floor-to-ceiling partitions and/or closable doors that are in compliance with the standards of the New York city energy conservation code and/or applicable standards referenced in such code as in effect for new systems installed on or after July 1, 2010.
3. The lighting system within dwelling units classified in occupancy group R-2 or R-3.
4. The lighting system within a space classified in occupancy group A-3 that is within a house of worship.
(Am. L.L. 2016/134, 10/31/2016, eff. 10/31/2016; Am. L.L. 2021/126, 11/7/2021, eff. 11/7/2022)
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088 and L.L. 2021/126.
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088.
Sub-meters shall be installed in covered buildings as provided in this article.
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088.
As used in this article, the following terms shall have the following meanings:
COVERED BUILDING. As it appears in the records of the department of finance: (i) a building that exceeds 25,000 gross square feet (2323 m
2
), (ii) two or more buildings on the same tax lot that together exceed 100,000 gross square feet (9290 m
2
), or (iii) two or more buildings held in the condominium form of ownership that are governed by the same board of managers and that together exceed 100,000 gross square feet (9290 m
2
).
Exceptions: The term "covered building" shall not include:
1. Real property classified as class one pursuant to subdivision one of section 1802 of the real property tax law; or
2. Real property, not more than three stories, consisting of a series of attached, detached or semi-detached dwellings, for which ownership and the responsibility for maintenance of the HVAC systems and hot water heating systems is held by each individual dwelling unit owner, and with no HVAC system or hot water heating system in the series serving more than two dwelling units, as certified by a registered design professional to the department.
COVERED TENANT SPACE. (i) A tenant space larger than 5,000 gross square feet (465 m
2
) on one or more floors of a covered building let or sublet to the same person, or (ii) a floor, of a covered building, larger than 5,000 gross square feet (465 m
2
) consisting of tenant spaces let or sublet to two or more different persons.
Exception: The term "covered tenant space" shall not include dwelling units classified in occupancy group R-2 or R-3.
METER. A device installed by an electrical utility company or corporation that measures the flow of electricity supplied to a building or to a defined space within a building and used by the utility to bill consumers for electrical service.
SUB-METER. A device meeting the standards of the department or, where applicable, the public service commission, installed within a building's electrical distribution system that measures the flow of electricity within a defined space within the building and that may, but need not, be used for apportioning the cost of electricity among the building's tenants or subtenants.
TENANT SPACE. Space within a covered building that is let or sublet to another person by the owner or a lessee of such space.
(Am. L.L. 2016/132, 10/31/2016, eff. 10/31/2016)
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2009/088.
Loading...