Loading...
503.2.7.2.2 Roadway markings.
Where required by the commissioner, approved roadway markings that include the words NO PARKING – FIRE APPARATUS ACCESS ROAD shall be provided for fire apparatus access roads to identify them as fire apparatus access roads.
503.2.8 Gates.
The design of gates across a fire apparatus access road shall be in accordance with this section.
503.2.8.1 Design requirements.
Gates across a fire apparatus access road shall comply with the following requirements:
1. The gates shall not encroach upon or otherwise reduce the required or approved width of a fire apparatus access road.
2. Gates shall be of the swinging or sliding type.
3. Manually-operated gates shall be designed to allow for operation by one person.
4. Only approved locking devices shall be used.
5. Manually-operated gates shall not be locked with a padlock or chain and padlock unless the padlock and chain are capable of being cut with standard bolt cutters.
6. Automatically-operated gates shall be designed and installed in accordance with ASTM F 2200 and UL 325, as applicable, and shall have an approved means of manual operation for emergency access by firefighters and other emergency response personnel.
503.2.8.2 Use to restrict access.
The commissioner may require the installation of locked gates where access to a road is to be restricted for fire apparatus use. It shall be unlawful to operate or park a motor vehicle on a fire apparatus access road restricted in this manner unless authorized by the commissioner.
503.2.9 Dead-end roads.
Dead-end fire apparatus access roads more than 150 feet (45 720 mm) in length, as measured from the curb line of the nearest public street which is not itself a dead-end, shall be provided with an approved means by which fire apparatus can turn around or otherwise exit the area in accordance with FC 503.2.9.1 or 503.2.9.2. Dead-end fire apparatus roads shall not exceed 400 feet (121 920 mm) in length unless approved by the commissioner.
Loading...