EDITOR'S NOTE: Unless otherwise indicated, this chapter was enacted on March 18, 1969, and amended on May 5, 1970.
1060.01 Permit required; plans.
1060.02 Application for permit.
1060.03 Compliance with standards.
1060.04 General design standards.
1060.05 Construction requirements.
1060.06 Applications.
1060.07 Limitations of chapter.
1060.08 Prohibition of use prior to approval.
Figure 1. Design Flow for Sewers When Average Flow=100 Gal./Cap./Day.
CROSS REFERENCES
Sewage disposal generally - see Code of Va. §§ 15.2-2122 et seq.
Department of Building and Development - see ADM. Ch. 240
Sanitation Authority - see ADM. Ch. 260
Construction of building sewers - see S.U. & P.S. 1064.10 et seq.
Pretreatment - see S.U. & P.S. Ch. 1068
Sewerage facilities in subdivisions - see P. & Z. 1245.08
No new sewerage system to serve or to be capable of serving three or more connections shall be established, and no extension of a previously approved sewerage system shall be made, until a detailed plan of such proposed new system or of such proposed extension, with proof of capacity to serve, has been filed with, and a permit therefor has been obtained from, the Board of Supervisors.
Application for a new system or for an extension, as described in Section 1060.01, shall be made in writing; shall state in detail the number, nature and location of connections to be served (including dwelling units, schools and other public buildings, and commercial and industrial establishments, together with the probable number of employees of each such establishment); shall be accompanied by scale drawings showing the location, size, material and extent of the proposed sewerage system, including appurtenances, together with such other pertinent information as the Board of Supervisors or its duly authorized representative may require; and shall show in sufficient detail the manner in which the applicant proposes to meet the standards set forth in Section 1060.04 et seq.
Loading...