Trash enclosures shall conform to the following design standards.
(A) Design. Walls shall be constructed of decorative block, masonry or similar materials. Enclosures shall have solid gates. Design and materials of the trash enclosure shall conform to the architecture of the buildings in the development. Additional landscape screening may be required by the Planning Director for any project requiring design review.
(B) Pedestrian access. Trash enclosures shall have pedestrian entrances in all residential developments and in commercial developments when shared by multiple units.
(C) Minimum size. Trash enclosures shall comply with the Trash Enclosure Standard Details: Industrial 706-0, Commercial 706-1, and Residential 706-2 in the Public Works Department Standard Plans and Special Provisions Manual.
(D) Location.
(1) Trash enclosures shall not be located in the required minimum front yard or minimum street side yard.
(3) Trash enclosure doors shall not open into driveways, extend into adjacent parking spaces or obstruct fire hydrants or building exits.
(4) Trash enclosures shall be located so that they are accessible to collection vehicles.
(5) Enclosures shall be placed a minimum of ten feet from water or utility lines and outside of any utility easements.
(6) Trash enclosures shall remain at least five feet from any combustible construction or building openings.
(E) Maintenance. See Chapter 8.20 (Collection of Refuse and Recyclable Materials) of the Corona Municipal Code for the maintenance of trash enclosure areas.
(`78 Code, § 17.79.050.) (Ord. 2794 § 1 (part), 2005; Ord. 2046 § 1 (part), 1991.)