(a) Accessory off-street parking spaces, driveways and maneuvering areas shall be properly graded for drainage so that all water is drained within the lot providing such parking spaces, surfaced with concrete, asphaltic concrete, asphalt or similar surfacing material and maintained in good condition and free of debris and trash.
(b) Accessory off-street parking spaces shall be provided with wheel or bumper guards that are so located that no part of a parked vehicle will extend beyond such parking space.
Therefore:
(1) Only one (1) such driveway shall be permitted for each one hundred (100) feet of frontage of the lot providing such parking spaces.
(2) No driveway shall be so located that there would be less than fifteen (15) feet between the point of tangency of the driveway apron radius and the outside crosswalk line at the intersection when such driveway is on the approach side of an intersection. In such cases as the driveway is on the leaving side of the intersection, the requirement shall be five (5) feet between the outside crosswalk line and the point of tangency of the driveway apron radius.
(3) The maximum width of such driveway shall be thirty (30) feet measured at right angles to the angle of the driveway entrance. Such driveway shall have an apron radius at the curb of not less than six (6) feet or a curb cut of not more than sixty (60) feet, and shall provide a means for motor vehicles to enter and leave the parking facilities without obstructing traffic.
(Ord. No. 762-68. Passed 12-16-68, eff. 12-17-68)