(a) No person shall cause, permit or allow the construction, installation or modification of any air contaminant source or control equipment to commence or proceed who has failed:
(1) To make an application for a permit to install or modify as required by Section 257.01; and
(2) To secure from the Commissioner a permit to install as required by Section 257.01; or
(3) To file a compliance statement and secure written approval of the Commissioner to proceed with the proposed installation or modification, as authorized in Section 257.04, in lieu of the issuance of a permit to install or modify.
If work on the construction, installation or modification of such source or control equipment has commenced or is proceeding, the Commissioner is authorized to stop all work being done and to seal that part or parts of such source or control equipment that has been constructed, installed or modified until a permit to install or modify or approval of a compliance statement is secured from the Commissioner.
(b) No permit to install or modify or permit to operate shall be issued by the Commissioner to any person or contractor unless such person or contractor complies with all the requirements of this Code.
(Ord. No. 857-A-76. Passed 6-27-77, eff. 6-30-77)