Loading...
Before the installation or alteration of an inside standpipe system required by the provisions of this Code, a plan, setting forth all essential details of the inside standpipe system, shall be submitted to the Fire Commissioner. Such plan shall include hydraulic calculations. Upon finding that the plan conforms to the requirements of the Code and after payment of standpipe permit fees hereinafter specified, said plan shall be approved by the Fire Commissioner.
The fees charged in connection with an inside standpipe system shall be as follows:
If the plan does not conform to the requirements of the Code and a revised plan is submitted, the fee for each revised plan submission shall be $200.00. For the approval of the standpipe plan and the initial inspection of the inside standpipe system required by the provisions of this code, a fee of $300.00 shall be charged for the first standpipe riser and $100.00 for each additional standpipe riser. For the test of a fire pump used in connection with an inside standpipe system, a fee of $31.50 for each unit of pumping capacity of 50 gallons per minute or fraction thereof shall be charged with a minimum permit fee of $315.00.
(Prior code § 91-55; Amend Coun. J. 12-15-92, p. 27387; Amend Coun. J. 10-30-96, p. 31261, § 1; Amend Coun. J. 5-18-16, p. 24131, § 126; Amend Coun. J. 11-14-18, p. 90376, Art. V, § 5)
After completing a standpipe system installation, the contractor shall submit to the Fire Commissioner a written certification that the system has been installed in accordance with the plans approved by the Fire Commissioner.
(Prior code § 91-56; Amend Coun. J. 10-30-96, p. 31261, § 1; Amend Coun. J. 5-18-16, p. 24131, § 127; Amend Coun. J. 10-7-20, p. 21791, Art. VI, § 16)
Loading...