(A) In order to provide maximum flexibility in the planning and design of mobile home parks, performance standards rather than rigid lot specifications shall provide the basic framework of this section.
(B) Any mobile home park designed with performance standards must have the approval of the executive secretary of the Plan Commission prior to submission for final approval, provided however that in no case shall any mobile home park exceed a density of 7.5 units gross acre.
(C) In designing a mobile home park, the following minimum performance standards shall apply: Each mobile home site shall be provided with a clear, unobstructed access to drive, street, or other easement to permit the placement of a home on the site. The access shall be provided from within the park and shall not be from any exterior street or alleyway.
(D) Mobile home stands:
(1) All mobile home stands shall be constructed as a grade- beam floating slab as shown in Figure l, on file with the Building Department; as a series of double-row concrete piers as shown in Figure 2, on file with the Building Department; or as a solid concrete slab as shown in Figure 3, on file with the Building Department. Type of construction to be approved by the Building Department.
(2) The area of the mobile home stand shall be improved in accordance with the building code to provide adequate support for the placement and tie-down of the mobile home, thereby securing the superstructure against uplift, sliding, rotation, and overturning.
('82 Code, § 19-452) Penalty, see § 152.99