9-7-10: DESIGN DETAIL AND STRUCTURAL STABILITY:
   A.   Responsibility Of Architect: The designing architect or engineer shall be responsible for certifying to the structural stability and safety of the pool.
   B.   No Limits For Length And Width: No limits are specified for length and width of swimming pools, except that swimming pools used for competition should meet required dimensions, and the requirements for diving areas as outlined in Section 9-7-21 of this Chapter shall be observed. Consideration shall be given to shape from the standpoint of safety and the need to facilitate supervision of bathers using the pool.
   C.   Circulation: Provisions shall be made for complete, continuous circulation of water through all parts of the swimming pool. All swimming pools shall have a recirculation system with necessary treatment and filtration equipment as required in this Chapter unless turnover rate requirements can be met by continuous introduction and wasting of water supply under conditions satisfying all other requirements of this Chapter.
   D.   Shape And Location; Safety: The shape of any swimming pool and design and location of all appurtenances shall be such that the circulation of the pool water and control of swimmers' safety are not impaired. Wading facilities for children shall be served by the swimming pool recirculation system with turnover rates of once every two (2) hours. (Ord. 11-2-3-71, 5-6-1971)