CHAPTER 1121
Manufactured Home Subdivisions
1121.01   Design standards.
1121.02   Streets.
1121.03   Walkways.
1121.04   Water and sewers.
1121.05   Electricity.
1121.06   Drainage.
1121.07   Health requirements.
1121.08   Underground utilities.
1121.09   Recreation area.
1121.10   Landscaping.
1121.11   Screening.
1121.12   Manufactured home stand.
1121.13   Manufactured home skirting.
1121.14   Garbage and refuse.
1121.15   Storm shelters.
 
   CROSS REFERENCES
         Manufactured home parks - see Ohio R.C. Ch. 3733
         Manufactured housing - see P. & Z. 1145.23
 
 
1121.01 DESIGN STANDARDS.
    The following design standards shall apply to manufactured home subdivisions.
    (a)    The subdivision shall contain a minimum of five acres.
    (b)    Each manufactured home site shall have a clearly defined minimum area of 4,000 square feet, with a minimum lot width of 40 feet, and a minimum depth of 100 feet. The minimum width of corner lots, however, shall be 50 feet.
    (c)    The subdivision shall have minimum frontage of 250 feet. The ratio of width to depth shall not exceed one to five (1:5).
    (d)    A side yard on each side of the subdivision and a rear yard of 30 feet or more shall be provided around the edge of the manufactured home subdivision. Such yards shall not be occupied by or counted as part of an individual manufactured home site.
    (e)    There shall be a minimum clearance of 20 feet between the individual manufactured homes.
   (f)    A maximum density shall not exceed 6 manufactured homes per gross acre.
1121.02 STREETS.
   All manufactured home subdivisions shall meet the street requirements and specifications of these regulations, Sections 1113.04 to 1113.12, inclusive.
 
Loading...