(A) Septage may be introduced into the system only at locations designated by the city manager, and at such times as are established by the city manager. Such wastes shall not violate the provisions of division 3 of this article or any other federal, State or local regulation. The city manager may require septic tank waste haulers to obtain IWD permits.
(B) Industrial waste or wastewater haulers shall obtain IWD permits from the city manager. The city manager may require generators of hauled industrial waste or wastewater to obtain IWD permits. The city manager also may prohibit the disposal of hauled industrial waste or wastewater. The discharge of hauled industrial waste or wastewater is subject to all other requirements of this article.
(C) Industrial waste or wastewater haulers may only discharge loads at locations designated by the city manager. No load may be discharged without prior consent of the city manager. The city manager may collect samples of each hauled load to ensure compliance with applicable standards. The city manager may require the hauler to provide a waste analysis of any load prior to discharge.
(D) Industrial waste or wastewater haulers must provide a waste-tracking form for every load. This form shall include, at a minimum, the name and address of the industrial waste or wastewater hauler, permit number, truck identification, source of waste or wastewater, and volume and characteristics of waste or wastewater. The form shall identify the type of industry, known or suspected waste constituents, and whether any wastes are hazardous wastes designated in RCRA.
(`64 Code, Sec. 25-27) (Ord. No. 2494)