In addition to the provisions of Chapter 1165, the following standards for the arrangement and development of land and buildings are required in the Limited Industrial (LI) District:
(a) Minimum Lot Area. No minimum lot area is required, however, all lots shall abut an improved public right-of-way and lot area shall be adequate to provide the required yard space.
(b) Minimum Lot Width. All lots shall abut a public street for a distance of one hundred (100) feet or more and have adequate lot width to provide the required yard space.
(c) Minimum Front Yard. The minimum front yard setback shall be no less than fifty (50) feet measured from the street right-of-way.
(d) Minimum Side Yard. For main and accessory structures, including open service and loading areas, the required side yard shall not be less than one-third the sum of the height and depth of the structure, but in no case shall be less than fifteen (15) feet from interior lot line, unless adjacent to any residential zoning district, Planned Residential District, and Planned Unit District whereby the side yard shall be no less than one hundred (100) feet.
(e) Minimum Rear Yard. For main and accessory structures, the required rear yard shall not be less than one-third the sum of the height and depth of the structure, but in no case shall be less than fifteen (15) feet from interior lot line, unless adjacent to any residential zoning district, Planned Residential District, and Planned Unit District whereby the side yard shall be no less than one hundred (100) feet.
(f) Maximum Lot Coverage and Intensity of Use. No maximum lot coverage is required, however, the lot coverage shall be adequate to provide the yard space required and meet the following provisions.
(1) A use allowed in the Limited Industrial District shall entirely enclose its primary operation within a structure except as a Conditional Use in accordance with Chapter 1181. It shall be determined that the operation screened by structures, fences, and/or other landscaping shall otherwise meet the standards and requirements of this zoning district. Open storage and service areas and loading docks shall be screened by walls or fences at least six feet but not more than twelve feet in height. These walls or fences shall have opaqueness of seventy-five percent (75%) or more, so as to effectively conceal production, storage, service, and loading operations from adjoining streets and from a residential zoning district or a planned development district.
(2) Permitted uses of this district may be developed in accordance with the development standards of Chapter 1149, Restricted Industrial District.
(g) Maximum Height of Structures. No structure shall exceed fifty feet in height.