Loading...
18-29-415 Laundry Trays.
18-29-415.1 Approval.
   Laundry trays shall conform to ANSI Z124.6, ASME A112.19.1, ASME A112.19.3, ASME A112.19.9, CSA B45.2 or CSA B45.4.
18-29-415.2 Waste outlet.
   Each compartment of a laundry tray shall be provided with a waste outlet a minimum of 1 1/2 inches (38 mm) in diameter and a strainer or crossbar to restrict the clear opening of the waste outlet.
18-29-416 Lavatories.
18-29-416.1 Approval.
   Lavatories shall conform to ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1, ASME A112.19.3/CSA B45.4 OR CSA B45.5/IAPMO Z124. Group wash fixtures shall conform to the requirements of Section 18-29-402. For determining the number of lavatories required by Table 18-29-403.1, every 20 inches (500 mm) of rim space of a group wash fixture shall be considered as one lavatory.
(Amend Coun. J. 10-14-21, p. 37722, Art. IV, § 17)
18-29-416.2 Cultured marble lavatories.
   Cultured marble vanity tops with an integral lavatory shall conform to CSA B45.5/IAPMO Z124.
(Amend Coun. J. 10-14-21, p. 37722, Art. IV, § 17)
18-29-416.3 Lavatory waste outlets.
   Lavatories and group wash fixtures shall have waste outlets not less than 1 1/4 inches (32 mm) in diameter. A strainer, pop-up stopper, crossbar or other device shall be provided to restrict the clear opening of the waste outlet.
(Amend Coun. J. 10-14-21, p. 37722, Art. IV, § 17)
Loading...