Loading...
18-29-413.3 Commercial food waste disposer waste outlets.
   Commercial food waste disposers shall be connected to a drain not less than 2 inches (51 mm) in diameter. Commercial food waste disposers shall be connected and trapped separately from any other fixtures or sink compartments.
(Amend Coun. J. 10-14-21, p. 37722, Art. IV, § 16; Amend Coun. J. 12-14-22, p. 58278, Art. VI, § 6)
18-29-413.4 Water supply required.
   Food waste disposers shall be provided with a supply of cold water. The water supply shall be protected against backflow by an air gap or backflow preventer in accordance with Section 18-29-608.
(Amend Coun. J. 10-14-21, p. 37722, Art. IV, § 16)
18-29-414 Garbage Can Washers.
18-29-414.1 Water connection.
   The water supply to a garbage can washer shall be protected against backflow by an air gap or a backflow preventer in accordance with Section 18-29-608.13.1, Section 18-29-608.13.2, Section 18-29-608.13.3, Section 18-29-608.13.5, Section 18-29-608.14 or Section 18-29-608.15.
18-29-414.2 Waste connection.
   Garbage can washers shall be trapped separately. The receptacle receiving the waste from the washer shall have a removable basket or strainer to prevent the discharge of large particles into the drainage system.
18-29-415 Laundry Trays.
18-29-415.1 Approval.
   Laundry trays shall conform to ANSI Z124.6, ASME A112.19.1, ASME A112.19.3, ASME A112.19.9, CSA B45.2 or CSA B45.4.
Loading...