14B-35-3500  Chapter 35.
The provisions of Chapter 35 of IBC are adopted by reference with the following modifications:
1.   Delete the cross-reference to provisions of the IBC following each reference.
1.1.   Insert a section to read:
Architectural Fabric Structures Institute c/o
Industrial Fabric Association International
1801 County Road B West
Roseville, MN 55113
FSAAS–16: Fabric Structures Associated Air Structures 2016
1.2.   Delete the entire section for ALI.
1.3.   Delete the entire section for AMCA.
2.   Insert the following standard under ASCE:
“41–17: Seismic Evaluation and Retrofit of Existing Buildings”
3.   Insert a section to read:
1791 Tullie Circle, NE
Atlanta, GA 30329
62.1–2016: Ventilation for Acceptable Indoor Air Quality
4.   Delete the following standards under ASME: ASME/A17.1–2016/CSA B44–16; A17.7–2007/CSA B44–07(R2012); A18.1–2014; and A90.1–2015.
5.   Insert the following standard under ASME:
“A120.1–2014: Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance”
6.   Insert the following standard under ASSE:
“ANSI/ASSE A10.8–2011: Scaffolding Safety Requirements”
7.   Delete the following standards under ASTM: B101–12; D5019–07a; D7254–15; E90–09; E492–09; E1886–13A; E1996–14a; and E2599–15.
8.   Insert the following standards under ASTM:
“A48/A48M–03(2016): Standard Specification for Gray Iron Castings”
“D2974–14: Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils”
“D4792/D4792M–13(2019): Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions “
“ASTM D8169/D8169M–18: Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load”
“E514/E514M–14a: Standard Test Method for Water Penetration and Leakage Through Masonry”
9.   Delete the following standard under AWC: ANSI/AWC PWF–2015.
9.1.   Delete the following standard under DASMA: ANSI/DASMA 115–2016.
10.   Delete the following standards under ICC: ICC 500–14; ICC 600–14; IEBC–18; IECC–18; IFC–18; IFGC–18; IMC–18; IPC–18; IPMC–18; IPSDC–18; IRC–18; ISPSC–18; and IWUIC–18.
10.1.   Delete the entire section for MHI.
11.   Delete the following standards under NFPA: 4–18; 70–17; and 221–18.
12.   Insert the following standards under NFPA:
"25–17: Standard for the Inspection, Testing and Maintenance of Water-based Fire Protection Systems"
“914–15: Code for Fire Protection of Historic Structures”
13.   Delete the entire section for PTI.
14.   Delete the following standard under UL: 1975–06.
14.1.   Insert the following standards under UL:
"521–99: Heat Detectors for Fire Protective Signaling Systems – with Revisions through March 2021
539–17: Single and Multiple Station Heat Alarms – with Revisions through May 2018."
15.   Delete the entire section for WRI.
(Amend Coun. J. 2-19-20, p. 14473, Art. II, § 103; Amend Coun. J. 10-7-20, p. 21791, Art. II, § 34; Amend Coun. J. 6-25-21, p. 32180, Art. II, § 28)