You are viewing an archived code
Pipe fittings shall be approved for installation with the piping material installed and shall conform to the respective pipe standard listed in Table 18-29-702.4.
Material | Standard |
Material | Standard |
Cast-iron pipe hub & spigot | ASME B 16; ASME B16.12; ASTMA 74; ASTM A 888; CISPI 301 |
Cast iron hubless c | ASTM A 888; CISPI 301 |
Copper or copper alloy | ASME B16.15; ASME B16.18; ASME B16.22; ASME B16.2-3; ASME B16.26; ASME B16.29; ASME B16.32 |
Glass b | ASTM C 1053 |
Polypropylene or Polyvinylfluorodene (PVDF) b | ASTM F11412; ASTM D4101 |
Gray iron and ductile iron a | AWWA C110 |
Malleable iron | ASME B16.3 |
Polyvinyl chloride (PVC) plastic c | ASTM D 3311 |
Steel | ASME B16.9; ASME B16.11; ASME B16.28 |
High Silicon content cast iron pipe b | ASTM F492-1985 |
Ductile iron pipe | AWWA C151; AWWA C115 |
a May be used on aboveground storm and sanitary only.
b For acid waste piping only.
c In any building three stories or less in height for residential occupancy only.
(Amend Coun. J. 7-29-15, p. 3537, § 4)