18-28-1102.1 General.

The system classification, allowable refrigerants, the maximum quantity, enclosure requirements, location limitations, and field pressure test requirements shall be determine as follows:

1. The refrigeration system's classification shall be determined in accordance with Section 18-28-1103.3.

2. The refrigerant classification shall be determined by Table 18-28-1103.1, Refrigerant and Amounts.

3. The system enclosure requirements shall be determined by Section, 18-28-1104, Systems Application Requirements, based on type of refrigerant, system classification, and occupancy.

4. The system enclosure shall be determined in accordance with Section 18-28-1104, Systems Application Requirements.

5. Refrigeration equipment and appliance location and installation shall be subject to the limitations of Article 3, General Regulations.

6. Non-factory-tested, field-erected equipment and appliances shall be pressure tested in accordance with Section 18-28-1108, Field Test.

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc