13-84-270 Fixed seating.

   In places of public assembly where more than 200 seats are arranged in rows, the seats shall be securely fastened to the floor except as follows:

   (a)   Seats in boxes and railed-in enclosures having not more than 14 seats.

   (b)   Temporary seating in a place of assembly secured together in units of not less than five seats.

(Prior code § 54-8.11)

13-84-280 Schools for handicapped children – Elevator requirements.

   Every floor above the second floor in a school for crippled children shall be served by an elevator or elevators with a floor area of at least four square feet per person, computed on the basis of a carrying capacity of all elevators sufficient to empty the school above the second floor in 20 minutes.

(Prior code § 54-8.12)

13-84-290 Accessibility for handicapped.

   Places of assembly shall conform to the following requirements in addition to requirements set forth in other sections of this Code:

   (a)   Such places of assembly shall provide a clear space in the assembly units for individuals in wheelchairs;

   (b)   These spaces shall be located so as not to interfere with egress from any row of seats;

   (c)   Places of assembly with fixed seating arrangements shall provide viewing positions for individuals in wheelchairs in accordance with the following schedule:

 

Capacity of Assembly Space:	Number of Viewing Spaces:
Up to 50 seats:	2 spaces
51 to 400 seats:	4 spaces
401 or more seats:	An even number of spaces not less than 1% of total seats.

 

(Prior code § 54-8.13)

13-84-300 Exhibition areas in excess of 10,000 square feet.

   Every new exhibition area in excess of 10,000 square feet shall comply with all applicable provisions of this Code and with the provisions of Sections 13-84-310 through 13-84-350 of this Code.

(Prior code § 54-9)

13-84-310 Automatic smoke and heat vents – Requirements for topmost occupied levels.

   Automatic smoke and heat vents shall be installed on the topmost occupied level of every exhibition area at a vent ratio of one square foot of vent area for each 100 square feet of floor area. Vents shall be spaced no greater than 100 feet apart (on centers).

(Prior code § 54-9.1)