(a) Purpose. The purpose of these Rules and Regulations is:
(1) To protect the public potable water supply from contamination or pollution by isolating within the consumer's water system contaminants or pollutants which could backflow through the service connection into the public potable water system.
(2) To promote the elimination or control of existing cross-connections, actual or potential, between the public or consumer's potable water system and nonpotable water systems, plumbing fixtures and sources or systems containing process fluids.
(3) To provide for the maintenance of a continuing program of cross-connection control which will systematically and effectively prevent the contamination or pollution of the public and consumer's potable water systems.
(b) Application. These Rules and Regulations shall apply to all premises served by the public potable water system of the City of Canfield.
(c) Policy. The City of Canfield City Manager or his designee shall be responsible for the protection of the public potable water supply from contamination due to backflow of contaminants through the water service connection. If, in the judgment of the City Manager or
his designee, an approved backflow prevention device is necessary at the water service connection to any consumer's premises for the safety of the water system, the City Manager or his designee shall give notice to the consumer to install such approved backflow prevention device at each service connection to this premises. The consumer shall immediately install such approved device or devices at his own expense, and failure, refusal or inability on the part of the consumer to install such device or devices immediately shall constitute grounds for discontinuing water service to the premises until such device or devices have been installed.
(Ord. 2019-02. Passed 1-2-19.)