CHAPTER 1121
U-4A Integrated Business District

1121.01   Intent.

1121.02   Permitted uses.

1121.03   Area, yard and height regulations.

1121.04   Off-street parking and  loading facilities.

1121.05   Site development plans.

CROSS REFERENCES

         Districts established - see P. & Z. 1111.01

         Building lines - see P. & Z. 1145.02

         Nonconforming uses - see P. & Z. Ch. 1147

         Certificates of occupancy - see BLDG. Ch. 1313

         Building permits, fees and deposits - see BLDG. Ch. 1329

1121.01 INTENT.

   It is the intent of this Chapter (Class U-4A Districts) to provide for the grouping of local retail shops and services in designated areas near residential neighborhoods primarily for the ordinary shopping needs of a daily and weekly nature, as well as for some of those establishments usually associated with such shopping; to protect both residential and business developments from congestion by requiring off-street parking and loading facilities; and to provide for indoor recreation and athletic facilities located to protect both residential and business developments from traffic congestion.  (Ord. 2018-94.  Passed 10-21-19.)

1121.02 PERMITTED USES.

   (a)   Buildings and land in a Class U-4A District shall be used and buildings shall be designed, created, altered or intended only for the uses specifically designated as Class U-4A uses in Section 1111.02, except that other similar harmonious and compatible uses as may be determined by the Commission and approved by Council may be permitted.

   (b)   Accessory uses customarily incident to the main uses listed above shall be permitted provided they are planned and developed in connection with the main building. Such accessory uses among those permitted under this section shall include:

      (1)   Parking garages and off-street parking and loading areas for employees and customers as provided in this chapter.

      (2)   Maintenance, storage and incineration facilities provided the incinerator is located within the main building and conforms to the regulations of Part III, Sections 3.1 to 3.13, inclusive, Bulletin 82 of the American Insurance Association.

      (3)    All solid waste collection, compaction, storage or container facilities shall be located within the main building and physically separated from other uses by a wall or similar partition.

         (Ord. 2018-94.  Passed 10-21-19.)