(a) Streets and sidewalks shall be constructed so as to serve the entire development or subdivision, and such construction shall conform to the provisions of these Subdivision Regulations and the City standard construction drawings.
(b) Where the widening, improving or abandoning of existing streets is deemed necessary by the City, the developer or subdivider shall perform such work as is necessary at his or her expense.
(c) The minimum acceptable street paving for a new subdivision or development is reinforced concrete seven inches thick with a three-inch base. Curb and drain tile should be part of the construction. Sidewalks shall be constructed of concrete, four inches thick.
(d) Minimum street pavement widths shall conform to the standards set forth in Schedule 1246.04(a)(13), except as provided for in division (b) of this section.
(e) Upon recommendation of the Planning Commission, and with the approval of Council, asphaltic concrete may be used in the installation and construction of bikeways, walking paths and common drives within a development, provided that the construction standards as set forth in Appendix B following the text of this Planning and Zoning Code, are met.
(f) Upon recommendation of the Planning Commission, and with the approval of Council, a six foot concrete bikeway and/or walking path may be installed and constructed in the right-of-way in front of newly constructed homes to maintain consistency between the surface of the driveway and the surface of the bikeway and/or walking path. Said installation and construction shall conform to the construction standards of a five foot concrete sidewalk as set forth in the City’s Standard Construction Drawings. (See Sidewalk Details, “Standard Construction Drawing” P-12.)
(Ord. 58-01. Passed 5-29-01; Ord. 193-04. Passed 12-13-04; Ord. 110-20. Passed 1-11-20.)