9.3.15. Fence and Wall Height

   A.   Measurement Location.

      1.   In cases where a fence or wall is located within a required setback or required yard, fence height shall be determined along the grade of the adjacent lot or street.

      2.   In cases where a fence or wall is located outside a required setback or yard, the height shall be determined based on the finished grade.

      3.   In cases where a fence or wall is placed on a berm, the maximum fence or wall height shall include the height of the berm, as measured from the toe of the slope.

      4.   Fence height shall be measured at the highest point above grade (not including columns or fence posts) on the portion of the fence nearest an abutting or adjacent lot or street right-of-way.

   B.   Column and Post Height. Columns or posts shall not exceed a height 18 inches above the built height of the fence.

   C.   Railings Not Included. Safety railings required by the North Carolina Building Code shall not be included in wall height measurements.

Figure 9.3.15: Fence and Wall Height Determination

(Ord. 2020-36, passed 12-2-2019)