The following Table 8-2.705 identifies the development requirements, including minimum parcel sizes, setbacks, and other standards that allowed and permitted uses in the industrial zones must meet as a standard or condition of any issued building permit, Site Plan Review, or Use Permit.
I ZONE | Minimum Lot Area (acres or square ft) (1) | Front Yard Setback (feet) | Rear Yard Setback (feet) | Side Yard Setback (feet) | Height Limits(2) (feet) | Maximum Floor Area Ratio (3) | Maximum Impervious Lot Coverage |
I-L | 5,000 square feet | None
(5) | None, except 25 feet if abutting residential zone
(5) | Maximum of 45 feet or four stories | 0.5 | 90% | |
I-H | 5,000 square feet | None, except 50 feet if abutting residential zone
(5) | |||||
OPRD | 1.5 acres | 10 feet or according to an approved Planned Development Ordinance | 10 feet, except 20 feet if abutting residential | None, except 20 feet if abutting residential | Maximum of 65 feet or five stories | 1.0 | 75% |
Notes:
(1) Parcels in rural areas with no access to public water and/or wastewater services are subject to 2.0 acre minimum parcel sizes for new building permits, see Section 8-2.1002(a).
(2) Appropriate findings for discretionary projects, and ministerial residential projects, located within the floodplain are required, see Section 8-2.306(ae). Structures built in the 100-year flood plain to comply with FEMA and local requirements will be measured from the top of the bottom floor, which may include a basement, crawlspace, or enclosed floor.
(3) See definition in Sec. 8-2.607.
(4) Development near the toe of any levee is restricted, see Section 8-2.306(ad).
(5) For cannabis uses, see Article 14 (Cannabis Land Use Ordinance) for setbacks and buffer requirements.
(Ord. 1445, eff. August 14, 2014; as amended by Ord. 681.229, eff. October 29, 2015; as amended by § 2, Ord. 1497, eff. June 7, 2018; as amended by § 2, Ord. 1545, eff. January 6, 2022)