(B) All
, spotlights and other types of outdoor lighting shall be installed such that the fixture shall be aimed down at least 45 degrees from vertical, or the front of the fixture is shielded such that no portion of the light bulb extends below the bottom edge of an external shield.
and display lights shall be positioned such that any such fixture located within 50 feet of a
is mounted and aimed perpendicular to the
, with a side-to-side horizontal aiming tolerance not to exceed 15 degrees from perpendicular to the
. These type lights shall not be used to illuminate or other site features unless approved as an integral architectural element on the
plan. On-site lighting may be used to accent architectural elements and not be used to illuminate entire portions of (s).
(C) All
emitting 1,000 or more
shall be aimed at least 60 degrees down from horizontal, or shielded such that the main beam from the
is not visible from adjacent properties or the
.
(D) All
fixtures on may be used at entrances to a to light unsafe areas. They are not intended to draw attention to the or provide general or site lighting. All
fixtures shall be true cutoff fixtures.
(E) Service connections for all freestanding fixtures installed after application of this subchapter shall be installed underground.
(F) Within the B1, B2, and B3 districts, all outdoor lighting fixtures shall be at minimum
.
(Ord. 2005-O3, passed 3-15-2005) (Am. Ord. 2013-O13, passed 5-21-2013; Am. Ord. 2016-O14, passed 10-25-2016)