Loading...
§ 76.042 ARM SIGNALS, MECHANICAL SIGNALS AND ELECTRICAL SIGNALS.
   The signal required in § 76.040 shall be given either by means of the hand and arm in the manner specified in § 76.043, or by an approved mechanical or electrical signal device. However, for a vehicle so constructed or loaded as to prevent the hand and arm signal from being visible both to the front and rear, the signal shall be given by device of a type which has been approved by the state department of commerce and regulation.
(1957 Rev. Ords., § 13.118; 1992 Code, § 40-184)
Statutory reference:
   Similar provisions, see SDCL 32-26-23
§ 76.043 METHOD OF GIVING HAND AND ARM SIGNALS.
   (a)   All signals required by this subchapter to be given by hand and arm shall be given from the left side of the vehicle in the following manner and the signals shall indicate as follows:
      (1)   Left turn. Hand and arm extended horizontally;
      (2)   Right turn. Hand and arm extended upward; and
      (3)   Stop or decrease speed. Hand and arm extended downward.
   (b)   As an alternative, bicyclists or e-bicyclists may use the right hand and arm extended horizontally to signal a right turn.
(1957 Rev. Ords., § 13.118; 1992 Code, § 40-185) (Ord. 46-12, passed 7-10-2012; Ord. 66-19, passed 6-18-2019)
REQUIRED STOP, YIELD INTERSECTIONS
Loading...