(a) Setback Requirements. Every permitted use of land and all buildings and structures shall be located on a lot in a manner that maintains the required setback from a right-of-way as well as the required side and rear setbacks set forth in Schedule 1165.07, measured from the appropriate lot line, except as otherwise regulated in Chapter 1183, Conditional Use Regulations, for conditional uses. The area within the setbacks shall remain unobstructed by structures, except as otherwise permitted in this Code.
Minimum Building Setbacks | |
CBD | |
(1) Minimum Setback from Street Right-of-Way | None (a) |
(2) Maximum Setback from Street Right-of-Way | 5 feet (a) |
(3) Minimum Setback from Side Lot line abutting nonresidential dist. | 5 feet (b) |
(4) Minimum Setback from Rear Lot Line abutting nonresidential dist. | None |
(5) Setback from Side Lot line abutting residential dist. | 25 feet |
(6) Setback from Rear Lot line abutting residential dist. | 25 feet |
Notes to Schedule 1165.07: (b) Except when buildings share a common wall, then there shall be no setback required. | |
(c) Supplemental Setback Requirements In the CBD. New construction shall comply with the minimum and maximum front setback requirements specified in Schedule 1165.07, except the maximum setback from a street right-of-way may be increased to fifteen (15) feet when a public use plaza or outdoor dining is located between the building and the street right-of-way. No other uses shall be permitted in this setback.