§ 155.426 RESIDENTIAL MULTI-FAMILY (R-MF).

   (A)   Purpose. This district is intended to primarily accommodate a mixture of housing types including single-family, multi-family, as well as townhouse developments.

   (B)   Permitted uses. See Table 155.501.

   (C)   Dimensional Standards Table:

Table 155.426.1: Residential Multi-Family (R-MF)
Standard	Residential	Nonresidential
Minimum Lot Size	12 gross acres [1]	Width: 100 feet | Area: 10,000 square feet
Maximum Height	8 stories or 100 feet whichever is less	8 stories or 100 feet whichever is less
Front Setback	60 feet	30 feet
Side Setback	20 feet	25 feet [2]
Rear Setback	20 feet	20 feet [3]
Street Side Setback	N/A	15 feet
Minimum Unit Size	750 square feet	N/A
Note(s): [1]   12-acres or less as a portion of a PUD [2]   Side setback shall increase by one foot for every two feet in height of building or structure exceeding 20 feet. [3]   Rear setback shall increase by two feet for every ten feet in height of building or structure exceeding 44 feet.

 

   (D)   Development standards.

Table 155.426.2: Multi-Family Development Standards
Standard	Residential
Maximum Density	Consistent with FLUM
Maximum Building Coverage	30%
Minimum Open Space	45% [1]
Minimum Between Buildings	15 feet
Vehicle Use Area	30% maximum non-pervious
Note(s): [1]   See additional Criteria in §§ 155.600 et seq.

 

   (E)   Additional standards.

      (1)   All single-family (R-1A, R-1B and R-1C) units shall comply with the standards set forth in § 155.421.

      (2)   All zero lot line (R-1Z) units shall comply with the standards set forth in § 155.422.

      (3)   All duplex (R-2) units shall comply with the standards set forth in § 155.424.

      (4)   All townhouse units (R-TH) shall comply with the standards set forth in § 155.425.

   (F)   See § 155.650 for additional criteria for Residential Multi-Family (R-MF) development.

(Ord. 2021-02, adopted 3-17-21; sought to be reconsidered, Commission passed 4-21-2021)

COMMERCIAL DISTRICTS