The following deletions and/or changes are hereby made to the Illinois State Plumbing Code.
Section 890.110 insert paragraph (e): The Fee Schedule as set forth in the building code of the Village of Monee established in Table 1 entitled Schedule of Permit Fees, shall apply to all electrical work.
Section 891.1200, Paragraph (a) entitled "Water Service Sizing" is hereby deleted and in lieu thereof is substituted the following:
a) Water Service Pipe Sizing: The water service pipe from the street main (including the tap) to the water distribution system for the building shall be sized in accordance with Appendix A, Tables M, N, O, P and Q. Water service pipe and fittings shall be at least 1" in diameter. If flushometers or other devices requiring a high rate of water flow are used, the water service pipe shall be designed and installed to provide this additional flow.
6) A full size Cleanout shall be located on the exterior of the building within 5' of the Foundation on all Building Drains. Exception this exterior Cleanout is not required for a building Drain that is only used for a RO system.
Section 890. Appendix A Plumbing Materials, Equipment, Use Restrictions and Applicable Standards as follows:
Under the section entitled "Approved Material for Water Service Pipe" Delete sections 1, 2, 4, 7, 8, 9, 10, 11, 12, 13, 12 and 15.
Under the section entitled "Approved Material for Water Distribution Pipe" Delete sections 1, 2, 5, 6, 7, 8, 9, 10, 11 and 12.
Under the section entitled "Approved Material for Building Sewer" Delete section 10.
(Ord. 1853, 5-23-2018)