(a) Generally. The following standards shall apply to all uses in B-3 Districts:
Minimum lot area | 40,000 square feet |
Minimum lot width | 200 feet |
Minimum setbacks | |
From any residential district | 100 feet (a) |
Front and side | 25 feet (a)(b) |
Rear | 40 feet (a) |
Maximum impervious surface ratio | .90 |
Minimum setback for accessory structures | |
From any residential district | 100 feet (a) |
Front (c) | — |
Side | 25 feet |
Rear | 40 feet |
Maximum height of accessory buildings | 20 feet |
(a) Minimum setback for all structures, uses and parking, except where specifically stated otherwise. | |
(b) For lots fronting on two streets, the principal building shall be set back from both streets according to the front setback of the district in which it is located. | |
(c) Accessory structures are not permitted in a front yard. | |
(Ord. 99-132, passed 10-11-1999)
(b) Landscaping. Landscaping shall be provided as specified in the Landscape Ordinance.
(c) Site plan. A site plan shall be submitted prior to obtaining a building permit as specified in Chapter 1135.
(d) Height regulations. No principal or accessory structures shall exceed three stories or 40 feet in height, except as provided in Chapter 1181.
(Ord. 98-104, passed 9-14-1998)
(e) Parking and driveway structures. If the parking and/or driveway structure is located adjacent to a residential district, the setback requirements shall be as set forth in Table 1159. Parking and driveway structures not adjacent to any residential use or district shall:
(1) In the case of parking structures be set back from the front lot line not less than 25 feet;
(2) Be set back from the side lot line not less than ten feet; and
(3) Be set back from the rear lot line not less than ten feet.
(Ord. 99-132, passed 10-11-1999; Ord. 2004-155, passed 1-10-2005)