(a) Construction plan application. After approval by Council of the preliminary plat and before grading work and construction of the required street, sanitary and drainage improvements may begin, the subdivider shall provide to the City Engineer for distribution and review:
(1) An application obtained in the Engineering, Building and Planning Department;
(2) Five sets of construction plans for all improvements, sealed by a state registered engineer, and prepared in accordance with the minimum construction plan requirements in this chapter, the design standards requirements of Chapter 1109, erosion control and stormwater standard requirements of Chapter 1119, and the city standard construction drawings developed by the City Engineer and Public Utilities Director; and following the subdivision arrangement shown on the approved preliminary plat;
(3) The required submission fee (see § 205.01); and
(4) Two copies of the drainage boundary map and stormwater calculations as required in Chapter 1119.
(b) Distribution of plans.
(1) Copies of the plans will be sent to the following agencies for recommendations (if applicable) and other action as may be required by law or regulation:
A. Butler County Engineer;
B. Public Works Director;
C. Public Utilities Director;
D. Fire Chief;
E. Parks and Recreation Director; and
F. Warren County Engineer.
(2) Failure of the above agencies or officials to report to the City Engineer within 30 calendar days from the date of referral shall be deemed to constitute approval of the construction plans by the agencies or officials.
(c) Construction plan approval and pre-construction meetings. After approval and signature of the plans by the City Engineer and Public Utilities Director, the subdivider shall contact the Engineering, Planning and Building Department to set a pre-construction meeting with all parties before beginning construction. Construction shall not begin until this meeting takes place.
(Ord. 99-207, passed 1-10-2000)