The minimum plumbing standards are as follows:
(A) The plumbing systems shall be connected to the town sanitary sewer system, where available; otherwise, the plumbing system shall be connected onto an approved septic tank;
(B) All plumbing fixtures shall meet the standards of the Town Plumbing Code, and shall be maintained in a state of good repair and in good working order;
(C) There shall be provided a hot water heater (minimum 30-gallon capacity) furnishing hot water to each tub or shower, lavatory, and kitchen sink;
(D) Installed water supply inside the building shall be provided for each housing unit;
(E) Installed water closet, tub or shower, lavatory, and sink shall be provided for each dwelling unit;
(F) Separate toilet facilities shall be provided for each dwelling unit;
(G) Toilet and bathing facilities shall be structurally protected from the weather;
(H) All water piping shall be protected from freezing by proper installation in protected space;
(I) At least one main vent of a minimum diameter of two inches shall be properly installed for each building; and
(J) Sewer and water lines shall be properly supported with no broken or leaking lines.
(Ord. 21-2018, passed 12-3-2018)