The final plat and accompanying supplementary materia] shall meet the following requirements:
A. Generally. The final plat shall be drawn in ink on tracing cloth on sheets eighteen inches wide by twenty-four inches long or twenty-six inches wide by thirty-four inches long and shall be at the scale of one hundred feet to one inch, or larger where necessary; the plat may be on several sheets, accompanied by an index sheet showing the entire subdivision. For larger subdivisions, the final plat may be submitted for approval progressively in continuous sections, satisfactory to the planning and zoning commission. The final plat shall show the following:
1. Primary control points, approved by the city engineer, or description and "ties" to such control points, to which all dimensions, angles, bearings and similar data on the plat shall be referred;
2. Tract boundary lines, right-of-way lines of streets, easements and other rights-of-way and property lines of residential lots and other sites, with accurate dimensions, bearing or deflection angles and radii, arcs and central angles of all curves;
3. Name and right-of-way width of each street or other right-of-way;
4. Location, dimensions and purpose of any easements;
5. Number to identify each lot or site;
6. Purpose for which sites, other than residential lots, are dedicated or reserved;
7. Location and description of monuments;
8. Names of record owners of adjoining unplatted land;
9. Reference to recorded subdivision plats of adjoining platted land by record name, date and number;
10. Certification by surveyor or engineer, certifying to accuracy of surveys and plat;
11. Certification title, showing that applicant is the land owner with marketable title;
12. Statement by owner dedicating streets, rights-of-way and any sites for public use (if any);
13. Title, scale, north arrow and date;
14. Certificates for approval by the city engineer and by the planning and zoning commission;
15. Certificates for approval by the city commission.
B. Cross Sections and Profiles of Streets. Cross sections and profiles of streets shall be included, showing grades approved by the city engineer, if he requires. The profiles shall be drawn by city standard scales and elevations and shall be based on a datum plane approved by the city engineer.
C. Certificate Concerning Improvements. A certificate by the city engineer shall be included, certifying that the subdivider has complied with one of the following alternatives:
1. All improvements have been installed in accordance with the requirements of this chapter and with the action of the city engineer giving conditional approval of the preliminary plat;
2. A surety company bond or other security acceptable to the planning and zoning commission has been filed with the city clerk, in sufficient amount to assure such completion of all required improvements (if any).
D. Other Data. Such other certificates, affidavits, endorsements or deductions shall be included as may be required by the planning and zoning commission in the enforcement of this chapter. (Ord. 447 (part), 2003)