1105.11 STREET DESIGN STANDARDS FOR COMMERCIAL AND INDUSTRIAL STREETS.

   The design and improvement standards contained herein are minimum for commercial and industrial streets. All such streets shall be designed in accordance with standards as specified in Table 6 and other applicable sections of these Regulations.

Table 6: Street Design Standards for Commercial and Industrial Streets
Terrain Classification	Level	Rolling	Hilly
Right of Way (ft)	80	80	80
Pavement Width (ft) without curb and gutter	24	24	24
Pavement Width (ft) with curb and gutter	29	29	29
Pavement Width (ft) with curb	28	28	28
Minimum Stopping Sight Distance (ft)	200	225	250
Maximum Cul-de-Sac Length (ft)	1,600	1,600	1,600
Minimum Cul-de-Sac Right-of- Way Radius (ft)	70	70	70
Minimum Cul-de-sac Pavement Radius (ft)	60	60	60
Minimum Centerline Radius of Streets with an Angle of Turn of: (1) Between 80° and 100° (ft) (2) Less than 80° or More than 100° (ft)	50 50 50 200 200 200	50 50 50 200 200 200	50 50 50 200 200 200
Maximum Grade (%)	4 4 4	8 8 8	15 15 15
Maximum Grade with curb (%)	0.5 0.5 0.5	0.5 0.5 0.5	0.5 0.5 0.5
Minimum Sidewalk Width (ft) when required	4 4 4	4 4 4	4 4 4

Refer to Chapter 1109 for definition of Terrain Classification.

Refer to Sections 1105.06(b) and 1105.07 for maximum grade at intersections.

No minimum grade required for streets w/o curb and gutter.

Refer to Section 1105.24 for sidewalk requirements.

(Ord. 56-2005. Passed 10-3-05.)