(a) A final plat shall contain the following additional information:
(1) Boundary of plat based on an accurate traverse with angular and lineal dimensions;
(2) True angle and distance to the nearest street intersection, accurately described on the plat;
(3) Municipal, township, county or section lines accurately tied to the lines of the subdivision by distances and angles;
(4) Radii, internal angles, points of curvature, tangent bearings and lengths of all chord dimensions;
(5) All lot numbers and lines with accurate dimensions in feet and hundredths and bearings in degrees and minutes;
(6) Accurate location of all monuments which shall be concrete six inches by six inches by thirty inches or six inches in diameter by thirty inches with an iron pin or brass plug cast in the center. One such monument shall be placed at each extreme corner of the subdivision. All lots shall be marked with steel pins and in place after a building is completed.
(7) Exact location, width and name of all streets or other public ways;
(8) All easements, accurately located and stating the purpose of which they are intended; and
(9) Accurate outlines and legal description of any areas to be dedicated or reserved for public use with purposes indicated thereon, and of any area to be reserved by deed covenant for the common use of all property owners.
(b) A final plat shall also contain:
(1) A certificate by an Ohio registered surveyor that the plat represents a survey made by him and that the monuments shown exist as located or will be set following construction and that all dimensional and geodetic details are correct.
(2) Notarized certification and acknowledgment by the owner or owners of the adoption of the plat and the dedication by them to public use of the streets and other public areas shown on the plat. No property should extend to the center of a right of way;
(3) Proper form for the approval of the Planning and Zoning Commission with space for the signature of the Chairman;
(4) Space for approval by signature of the Village Engineer and the Manager;
(5) Proper form for approval and acceptance by Council, showing chapter number, and provision for signature by the Village Clerk; and
(6) Space for transfer by the County Auditor and recording by the County Recorder. A statement of the expiration date of the Village approval shall be placed ahead of the space provided for the County Auditor's signature.