Separate plans and specifications including all necessary details, profiles and cross-sections for each improvement, specified in Sections 1173.01 and 1174.04, must be submitted to the Engineer and his approval obtained thereon after approval of the preliminary plan and prior to the installation or construction of each such improvement and prior to any action of the Planning Commission to approve the final plat for record. Such plans and specifications must have been prepared by a registered professional engineer on tracing cloth or an equivalent, upon sheets measuring approximately twenty-four (24) inches in width and thirty-six (36) inches in length to scale with the signature and seal of the registered engineer affixed thereto. If the plans and specifications submitted to the Engineer show compliance with the design standards and with the other requirements of these Regulations, and with the approved preliminary plan for the subdivision, the Engineer shall approve such plans and specifications.
(Ord. 2016-07-24. Passed 8-3-16.)