1155.08 PARKING LOT DESIGN STANDARDS.

   (a)   Dimensional Standards.  

      (1)   Off-street parking stalls and parking lots shall be designed and constructed in accordance with the minimum dimensions set forth in Table 1155.08, based on the angle of the spaces.

      (2)   Each parking space shall be exclusive of all drives, aisles, ramps and other circulation areas.

 

Table 1155.08 Parking Lot Dimensional Standards
	54 to 75 Degrees	76 to 90 Degrees
A. Width of parking space	10 ft.	10 ft.
B. Length of parking space	20 ft.	20 ft.
C. One-way circulation - Min. aisle width	19 ft.	22 ft.
D. Two-way circulation - Min. aisle width	22 ft.	24 ft.

 

   (b)   Access Required. All required parking spaces shall have direct access to a private driveway, access drive or circulation aisle without the need to move any other vehicle.

   (c)   Screening. All parking areas shall be screened and landscaped, the plans for which shall be submitted to and approved by the Planning Commission in accordance with Chapter 1159.

   (d)   Parking Spaces For Persons With Disabilities. All new construction and alterations to places of public accommodation shall provide off-street parking spaces that are designed and constructed in accordance with the Americans with Disabilities Act (ADA) of 1990 to be readily accessible to persons with disabilities.

(Ord. 2016-07-24. Passed 8-3-16.)