SECTION 13.5 MEASUREMENT OF ALL FENCE OR WALL HEIGHTS AND LOCATIONS.

   A.   All fences and/or walls heights shall be measured along the fence or wall locations.

   B.   All locations for distance measurements shall be measured from lot lines.

(Ord. 2017-6, passed 4-4-17)

SECTION 13.6 HEIGHT OF ANY BARBED WIRE OR SHARP POINTED FENCES.

   In all zones barbed wire or sharp pointed fences, where permitted, must start a minimum of 60 inches above ground level, except that those fences may be located in area uses for agricultural purposes without any restrictions to height.

(Ord. 2017-6, passed 4-4-17)

SECTION 13.7 HEIGHT OF FENCES ATOP RETAINING WALLS.

   A combination fence and retaining wall may be erected. The retaining wall portion may be erected up to the level of the higher finished grade. The fence portion must be of the class and height permitted within this appendix for the applicable zone. The measurement shall be made at and along the location of the fence and retaining wall.

(Ord. 2017-6, passed 4-4-17)

SECTION 13.8 ELECTRIFIED FENCES.

   No fence carrying an electrical charge shall be permitted in any zone except when the fence is used in conjunction with an agricultural use and provided the fence is no located along the perimeter with adjacent property.

(Ord. 2017-6, passed 4-4-17)

SECTION 13.9 PERMIT REQUIRED FOR ERECTION OF FENCES.

   No fence shall be erected, except as exempted or specified within this appendix, until all required fees have been paid to the proper authorities or their agents and the necessary permits have been issued for such by the City Inspector/Zoning Administrator in accordance with §§ 16.1 and 16.2.

(Ord. 2017-6, passed 4-4-17)