(a) Every dwelling unit shall be supplied with plumbing, plumbing fixtures and water heating facilities which are installed in an approved manner, properly maintained and properly connected with hot water lines to the fixtures required to be supplied with hot water under this section. Such water heating facilities shall be capable of heating water to such a temperature as to permit an adequate amount of water to be drawn at every required kitchen sink, lavatory tub or shower at a temperature of not less than one hundred twenty degrees Fahrenheit (forty-nine (49) degrees Celsius) under normal use at all times.
(b) All plumbing fixtures in a dwelling structure shall be supplied with running water from the City water supply system.
(c) All sinks, lavatories, tubs and showers shall be supplied with hot and cold running water properly connected to plumbing fixtures.
(d) All plumbing fixtures in a dwelling structure shall be so designed and installed as to prevent contamination of the water supply system and shall be maintained structurally sound and in good repair.
(e) All plumbing fixtures in a dwelling structure shall be connected to a public sanitary sewer.
(f) Any change in the water supply or drainage systems of a dwelling unit may require that a permit be obtained from the Building Department pursuant to the provisions of Section 1311.09 of the Building Code.
(g) For the purposes of this section, "approved" and "properly maintained" include, but are not limited to, the items contained in Appendix Schedule I of this Housing Code.
(Ord. 102-1983. Passed 12-19-83.)