A proposed development as permitted in this district shall comply with the following development standards:
(a) Yard Requirements. Buildings and accessory uses shall be located in accordance with the following:
(1) Buildings shall be located no closer than forty (40) feet to an existing public right of way.
(2) Accessory parking areas shall be located no closer than forty (40) feet to an existing public right-of-way bounding the district and twenty (20) feet to an interior public or private street.
(3) Buildings and parking areas shall be located no closer than 150 feet to an AA or A District.
(4) All portions of the property not covered by buildings, parking areas and other permitted structures shall be landscaped with grass, trees, shrubbery and/or other appropriate ground cover or landscaping material as required by the Board of Control, and which at all times shall be maintained in good and healthy condition so as to assure adequate screening of parking and loading areas, as well as absorption of rainfall.
(b) Height Regulations. The height of a proposed building shall be limited as follows by its location on the development site in relationship to adjacent properties:
(1) The maximum building height shall not exceed one-half (1/2) the distance from the building to any property line in an AA, A, or B District, provided the yard requirements set forth in subsection (a) hereof are maintained.
(2) The maximum building height shall not exceed the distance from the building to any property line in a MF District, provided the yard requirements set forth in subsection (a) hereof are maintained.
(3) The maximum height of a building as set forth in subsections (b)(1) and (2) hereof shall be measured from the average grade along the property line of the adjacent residential property.
(4) In no case shall buildings exceed 120 feet in height.
(c) Additional Standards. Additional site specific development requirements formulated to achieve the objectives of the S-1 Mixed Use District shall be established during the approval process at the time the detailed development plan is reviewed. Any dimensional specifications adopted with such plan become binding land use requirements for the proposed development.
(Ord. 025-2023. Passed 6-5-23.)