18-28-1101.2 Standards for Pressure Vessels.

Pressure vessels for refrigeration systems over 6 inches (152.4 mm) inside diameter with a design pressure of 15-psig.(6.304 kg) or greater shall be designed, constructed, tested and stamped in accordance with the American Society of Mechanical Engineers Code for Unfired Pressure Vessels. Pressure vessels 6 inches (152.4 mm) inside diameter and smaller or under 15 psig (6.304 kg) pressure shall be designated and constructed in accordance with the American Society of Mechanical Engineers Code requirements for Unfired Pressure Vessels.

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc