18-11-1112.2.5 Gaps at rail crossings.

If the pedestrian route crosses rail systems at grade, the gap at the inside edge of each rail shall be the minimum necessary to allow passage of the rail car wheel flanges but shall not exceed 3 inches (76 mm) for tracks that carry freight rail, and 2 1/2 inches (64 mm) for all other rails. The surface of the pedestrian route shall be level and flush with the top of the rail at the outside edges and between rails.

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc