(a) The preliminary plat of the proposed subdivision, four (4) black or blue line prints prepared by a registered Ohio Engineer and surveyor, shall accompany an application in writing to the Building Commissioner for tentative approval of the subdivision.
(b) A vicinity sketch at a scale of four hundred feet (400 ft.) or less to the inch shall be drawn on or shall accompany the preliminary plat. Such vicinity sketch shall show all adjacent existing subdivisions and their names, the tract lines of acreage parcels of land together with the names of record owners of such parcels, and all street and alley lines immediately adjoining the proposed subdivision and between it and the nearest existing highways or thoroughfares.
(c) The horizontal scale of the preliminary plat shall be thirty feet (30 ft.) or less to the inch.
(d) The preliminary plat shall clearly show and indicate the following features and information:
(1) The proposed name of the subdivision, which shall not duplicate or closely approximate the name of any other subdivision in the City.
(2) An accurate description of the property involved according to the real estate records of Cuyahoga County.
(3) The names and addresses of the owners of record, the developer, and the surveyor and engineer who prepared the plat.
(4) The names adjoining subdivisions and the names of record owners of adjoining parcels of unplatted land.
(5) The boundary lines, accurate in scale, of the tract to be subdivided.
(6) The location, widths and names of all existing or platted streets or other public ways and easements within or immediately adjacent to the tract, corporation lines, section and quartersection lines, and other important features such as existing permanent buildings, watercourses, railroad lines, etc.
(7) Existing sewers, water mains, culverts and other underground structures within the tract and immediately adjacent thereto, with pipe sizes and grades indicated.
(8) Contours, normally with intervals of five feet (5 ft.), except in flat territory where intervals of two feet (2 ft.) may be required, referenced to regional geodetic survey.
(9) The layout, proposed names and widths of proposed streets, alleys and easements; the number, location and approximate sizes of proposed catch basins, culverts, fire hydrants and other structures or appurtenances; the layout, numbers and approximate dimensions of proposed lots.
(10) Proposed front yard setback or other setback lines.
(11) All parcels of land intended to be dedicated or reserved for public use, or to be reserved in the deeds for the common use of property owners in the subdivision, with the purpose, conditions or limitations of such dedication or reservation indicated.
(12) North point, scale and date.
(13) Geometric designs of all sewer and water improvements, including the layout and proposed grades of sewer and water inlets and inverts, water connections and detention basins.
(14) A grading Plan, including proposed elevations of streets, drives, aprons, walks and the finished floor elevation of all principal structures.
(15) Copies of any proposed restrictions.
(Ord. 7435-01. Passed 2-18-02.)