Minimum right of way widths as follows:
(a) Highways and primary thoroughfares: as designated on the Transportation Plan, but not less than eighty feet (80 ft.) wide in any case.
(b) Secondary thoroughfares and parkways: as designated on the Transportation Plan, but not less than sixty feet (60 ft.) wide in any case.
(c) Local streets, minor streets and dead-end streets (courts): sixty feet (60 ft.). All dead-end streets shall terminate in a circular turn-around having a minimum right of way diameter of one hundred feet (100 ft.), unless the Planning Commission approves a "T" or "Y" shaped paved space in place of the required turning circle.
(d) Alleys and service drives: twenty feet (20 ft.).
(e) Easements for utilities, where required, shall be at least ten feet (10 ft.) wide centered on rear or side lot lines.
(Ord. 7435-01. Passed 2-18-02.)