(30.50.10)
(B) Yards.
(1) Minimum required yards in commercial and industrial districts shall be as set forth in Table 2 of this article.
(2) Table 2, required yards in commercial and industrial districts:
District
|
Yards (feet), Minimum
| ||
Front Yards
|
Interior Yards
| ||
Along Property Lines Abutting Property in an R, P, or O District*
|
Not Along Property Lines Abutting Property in an R, P, or O District
| ||
District
|
Yards (feet), Minimum
| ||
Front Yards
|
Interior Yards
| ||
Along Property Lines Abutting Property in an R, P, or O District*
|
Not Along Property Lines Abutting Property in an R, P, or O District
| ||
CN | 20 | 8 | - |
CI | - | 8 | - |
CS | - | 8 | - |
CG | 20 | 8 | - |
ML | 20 | 8 | - |
MH | 20 | 8 | - |
Note to table: * Where a lot in a commercial or industrial district abuts property in an R, P, or O district, an interior yard shall not be required on such lot where the adjacent building wall on such lot is of solid masonry, not pierced by a door, window, or air passage. | |||
(30.50.20)
(C) Height. Where a lot in a commercial or industrial district abuts property in an R, P, or O district, no structure on such lot adjacent to such other district shall exceed the height of 25 feet, unless the portions exceeding such height are set back from the interior yard line adjoining such property in the same manner as is provided herein for structures in such R, P, or O district. In the case of a structure abutting on an alley, the setback shall be measured from the alley line.
(30.50.30)
(Prior Code, Appendix B, § 30.50) (Ord. 702, passed 3-15-1971)