(a) General Standards
Table 30-1 provides the development standards for the Airport Development District, the Light Manufacturing District, the Manufacturing/Industrial District, and the Business Park District. Design Review and Standards for Industrial Districts can be found in Section 17.15.070 of this Zoning Code.
(b) Building Materials
Building Material requirements can be found in Section 17.15.070 of this Zoning Code.
(c) Airport Development Standards
Construction within the 65 CNEL Noise Contour of the Airport will be required to conform to construction standards of state and federal guidelines including the Comprehensive Airport Land Use Plan (CALUP) standards. Construction of buildings and structures are limited by the height and lighting requirements of the Federal Aviation Authority (FAA) Regulations Part 77. Aviation easements will be required for each development.
(d) Trash enclosures
Trash enclosures shall be provided for any lot or parcel for the temporary storage and collection of trash, rubbish, and/or garbage (hereafter “trash facilities”) in accordance with all of the following requirements:
(1) Trash enclosures may be located within a building, or if in the open, shall be enclosed by a decorative masonry wall, architecturally compatible with the main building. Such trash enclosure shall include a solid gate for bin access and a separate view obscuring pedestrian access.
(2) All trash enclosures visible from streets or public parking areas shall be constructed and finished to be compatible with the architectural details and decor of the primary structure.
(3) All trash enclosures shall be regularly cleaned and maintained;
(4) All trash containers and trash bins shall incorporate a tight-fitting lid;
(5) All trash enclosures shall be located for convenient access by occupants of the site and vehicular access for pick-up and disposal, but shall be either in the rear or on the side of the building.
(6) Trash enclosures are prohibited in the front setback, or any setback areas abutting residential zones, or properties used for residential purposes.
(e) Buffering and Screening
(1) A minimum eight (8) foot high masonry wall shall be provided adjacent to residential used or zoned areas.
(2) A low wall, berm, or solid landscaped hedge 36" to 42" in height shall be provided between public streets and parking and driveway areas to screen parking areas, per Chapter 17.60
(Landscape/Water Conservation).
(f) On-site Lighting
(1) All on-site lighting shall be energy efficient, stationary and directed away from adjoining properties and public rights-of-way.
(2) Light fixtures shall be shielded so no light is emitted above the horizontal plane of the bottom of the light fixture.
(3) Light fixtures shall be shielded so no light above 0.5 foot-candle spills over onto adjacent properties and rights-of-way. There shall be no spillover (0.0 foot-candle) onto adjacent residential used or zoned properties.
(g) Noise
Noise requirements are subject to Chapter 17.90 (Performance Standards) of this Zoning Code.
(h) Landscaping/Water Conservation
All landscaping shall comply with the requirements of Chapters 17.60, Landscaping/Water Conservation and 17.15 Design Review of this Zoning Code.
(i) Signs
All signs shall conform to Chapter 17.70 (Signs) of this Development Code.
[Ord. No. 474, Section 5, 5/28/08; Ord. No. 515, Exhibit H, 5/22/13; Ord. No. 528, Exhibit J, 9/10/14.]