(a) Size, shape and orientation. The size, shape and orientation of lots shall be appropriate to the location of the proposed subdivision and for the types of development contemplated, in compliance with applicable requirements set forth in the Zoning Code.
(b) minimum frontage and lot widths. Lot frontage and width shall comply with the requirements set forth in the Zoning Code.
(c) Access.
(1) Generally. All lots shall front on an improved public street except as otherwise allowed in the Zoning Code.
(2) Lots fronting directly on a primary thoroughfare. Any lot which is platted after the enactment of these Subdivision Regulations (Ordinance 22-1979, passed September 11, 1979) and which fronts or is proposed to front directly on a primary thoroughfare, as delineated on the Official Thoroughfare Plan, shall have a turnaround provided in conjunction with the driveway serving the structure thereon, to discourage motor vehicles from backing out onto the primary thoroughfare.
(d) Double frontage lots. Lots with double frontage shall not be approved, except to avoid frontage upon heavily traveled thoroughfares.
(e) Lot lines. Side lines of lots shall be approximately at right angles or radial to the street line unless, in the opinion of the Planning Commission, a variation from this rule will give a better street and lot plan.
(f) Building lines or set-back lines. Minimum building lines or set-back lines shall comply with the requirements set forth in the Zoning Code.
(Ord. 22-1979, passed 9-11-1979)