Table of Estimated Ultimate Population per Dwelling Unit | |
Type of Unit | Total per Unit |
Detached Single-Family: | |
Three-Bedroom | 2.801 |
Four-Bedroom | 3.631 |
Five-Bedroom | 3.630 |
Attached-Single Family (Townhouse, Row House, Quadruplex, etc.) | |
One-Bedroom | 1.068 |
Two-Bedroom | 2.077 |
Three-Bedroom | 2.403 |
Four-Bedroom | 3.243 |
Low Density Apartment (to 15/acre): | |
Efficiency | 1.360 |
One-Bedroom | 1.753 |
Two-Bedroom | 1.821 |
Three-Bedroom | 3.018 |
(B) In the event that the subdivider, developer, or builder intends to sell only undeveloped parcels or lots, or if it is impossible or impractical to determine at the time of final plat approval the ultimate number of bedrooms in future single-family units, for the purposes of this chapter required contributions shall be calculated as if the development will ultimately contain the following ratio of bedroom units:
(1) Three bedrooms (or rooms which could be used as bedrooms), 65%.
(2) Four bedrooms (or rooms which could be used as bedrooms), 30%.
(3) Five bedrooms (or rooms which could be used as bedrooms), 5%.
Source: Adapted from Professional Builder 1977 Consumer Survey.
(C) The developer, subdivider, or builder may submit alternative studies or information on current housing markets in place of the above figures to the Planning and Zoning Board. The Planning and Zoning Board and Board of Trustees shall then make a final decision as to which figures most accurately reflect the ultimate future bedroom ratio.
(Ord. 1995-0-25, passed 12-26-95)