A. Determination Of Block Dimensions: The length, widths, and shapes of blocks shall be determined with due regard to:
1. Provision of adequate building sites suitable to the special needs of the type of use contemplated;
2. Zoning requirements as to lot sizes and dimensions within the corporate limits of the village of Winfield;
3. Needs for convenient access, circulation, control and safety of pedestrian and street traffic.
B. Block Dimension Restrictions: The length, width, and shape of blocks shall be such as are appropriate for the locality and the type of development contemplated, but block length in residential areas shall not be less than three hundred fifty feet (350') nor exceed one thousand feet (1,000'), nor have less than sufficient width to provide two (2) tiers of lots of appropriate depth between street lines, except for blocks with one tier of lots which meet the double frontage requirements of this title. Double frontage lots shall not be allowed except where subject lots back to a major collector or arterial roadway, and such lots shall be a minimum of twenty percent (20%) deeper than the average throughout the subdivision.
C. Blocks Located In Industrial/Commercial Areas: Blocks or portions thereof intended for commercial or industrial use shall be designated as such, and the plans shall show adequate off street areas to provide for parking, loading docks, and other such facilities, as provided in the village zoning ordinance. (Ord. 2015-02-05, 2-5-2015)